ENVEA

- Model PCME STACK 980 - ElectroDynamic Approved Particulate CEM

From

0

MCERTS EN 15859 Filter Dust Approved Particulate monitoring system providing high quality emission measurement for low dust concentrations from dry industrial processes including Baghouses and Cartridge Filters.

  • Robust design unaffected by product build-up on the sensor rod
  • No additional services such as air purge required, providing lower cost of ownership
  • Simple maintenance no requirement for specialist service personnel
  • Networking up to 16 sensor channels via Modbus and providing multiple inputs and outputs for external connections
  • Extensively used for measurement (mg/m³) and leak location in bag filter stack applications
  • Advanced sensor design includes drift checks (zero and span) and contamination checks
  • Passive/Active and fully insulated sensor options available for applications with stack condensation and damp particulate prevents potential short circuit to stack wall

  • Stacks after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
  • Non-condensing / dry flue gases
  • Variable velocities within range 8 – 20 m/s (typical bag filter velocity ranges), constant velocity required outside this range
  • After process dryers

Typical Applications:

  • Incineration
  • Metals (eg Steel/Aluminium)
  • Minerals (eg Cement/Gypsum)
  • Chemicals (eg Detergent / Carbon Black)
  • Power Generation Plant (eg Coal/Biomass)

  • Measured parameters: Dust
  • Technology: ElectroDynamic® Advanced Probe Electrification
  • Measurement/Monitoring capability: 0-1000 mg/m³*
  • Stack/Duct diameter suitability: up to 8m
  • Flue gas temperature: up to 800°C
  • Baghouse: YES
  • Cartridge Filter: YES
  • Ceramic Filter: YES
  • Coalescent Filter: YES
  • Cyclone: YES
  • Electrostatic Precipitator (ESP): /
  • Wet Electrostatic Precipitator (WESP): /
  • Wet Scrubber: /
  • Sensor variants:
    • Stainless Steel
    • Fully insulted PTFE coated
    • Passive/Active
  • QA checks: YES

  • Measurement capability: 0 – 1000 mg/m3
  • Sensor Variants: 316 Stainless Steel / Fully insulated PTFE coated (option) / Passive/Active (option)
  • Stack Temperature Ranges: 0 -250°C up to 800°C (option)
  • Functionality and QA Checks: Automatic zero and span / Short circuit check / Contamination check / Drift checks
  • Data Output: RS485 (Modbus) output to Controller
  • Air Purge: option
  • Enclosure Protection Rating: IP66

  • MCERTs certified to EN15859 (Filter Dust monitor)
  • EX Zone 2, 20
  • US EPA MACT Compliant BLD

Customer reviews

No reviews were found for ENVEA - Model PCME STACK 980 - ElectroDynamic Approved Particulate CEM. Be the first to review!