ENVEA - Model QAL 181-QAL1 -Forward Scatter Particulate CEM
FromENVEA
QAL1 Approved ProScatter™ particulate CEM providing high quality emission measurement of low dust concentrations from dry industrial processes. 4 QAL1 certified ranges, including 0 – 7.5 mg/m3, the lowest achievable for any PM-CEM.
Most popular related searches
particulate continuous emissions monitor
wet electrostatic precipitator
electrostatic precipitator
electrostatic precipitation
dry flue gas
bag filter cartridge
wet electrostatic precipitation
cartridge filter
CEMS
filter cartridge
- QAL1 certification ranges: 0 – 7.5 mg/m3, 0 – 15 mg/m3, 0 – 100 mg/m3, 0 – 200 mg/m3
- Robust design with no critical moving parts
- Available for use in high-temperature stack conditions and Ex hazardous zones
- Easy to fit multi-patterned flange
- Adjustable monitoring depth to ensure sampling in the most representative part of the flow path
- Enhanced measurement due to reduced cross sensitivity to particle type and size
- ProScatter™ technology offers enhanced measurement due to reduced cross-sensitivity of particle type and size
- Easily audited with manual filters
- Stack Particulate monitoring after bag filters, cartridge filters, cyclones, electrostatic precipitators, no filtration
- Non-condensing / dry flue gases
Typical Applications:
- Incineration
- Metals (eg Steel/Aluminium)
- Minerals (eg Cement/Gypsum)
- Chemicals (eg TiO2 / Refinery)
- Power Generation Plant (eg Coal/Biomass)
- Measured parameters: Dust
- Technology: ProScatterTM Forward Scatter
- Measurement/Monitoring capability: 0-1000 mg/m³*
- Stack/Duct diameter suitability: up to 8m
- Flue gas temperature: up to 500°C
- Baghouse: YES
- Cartridge Filter: YES
- Ceramic Filter: YES
- Coalescent Filter: YES
- Cyclone: YES
- Electrostatic Precipitator (ESP): YES
- Wet Electrostatic Precipitator (WESP): /
- Wet Scrubber: /
- MCERTS & TÜV (UBA) to EN15267-3: YES
- QAL1 certified to EN14181: YES
- QAL3 to EN14181: YES
- GOST: YES
- ATEX: YES
- Sensor variants: Stainless Steel
- Hastelloy® corrosion resistant
- QA checks: YES
*Application dependant
Certified:
- MCERTs and TÜV (UBA) certified to EN15267-3 (incl. 0-7.5 mg/m3)
- QAL1 as defined by EN14181
- QAL3 compliance to EN14181
- EN13284
- GOST Approved, etc.
- Ex Zone 2