Sewer Shield - Model Flex-Guard 250 -Epoxy Coating System for Concrete Surface
The Flex-Guard 250 System is an advanced, 100% solids, monolithic, solvent-free epoxy coating designed specifically for application on concrete walls and floors. This system incorporates a seal coat, polyester fabric, and a topcoat, creating a durable, resilient surface upon application. The inclusion of polyester fabric enhances its ability to resist cracking due to thermal fluctuations. Ideal for both interior and exterior containment areas, the Flex-Guard 250 provides superior chemical resistance and adhesion to clean, sound damp concrete. The application process demands rigorous preparation of surfaces, including mechanical cleaning and repairs, followed by multiple coats to achieve the necessary thickness. Available in various colors, the system promises low odor and compliance with USDA requirements. The product requires proper handling with protective clothing, and a strict warranty covers material and workmanship, with limitations. The Flex-Guard 250 SDS sheet outlines safety and usage instructions.- Flex-Guard 250 System is a unique, 100% solids, monolithic, solvent free, epoxy system designed to be applied over concrete walls and floors.
- Flex-Guard 250 System consists of a seal coat, polyester fabric and a topcoat of Flex-Guard 250 System, which when applied to walls or floors, will form a resilient, monolithic surface.
- Due to the resiliency and polyester fabric, Flex-Guard 250 System has the ability to resist cracking due to changes in the weather.
Inside or Outside Containment Areas
- Remove all existing coating.
- Mechanically clean (sandblast) walls and floors to remove all oils and contaminants.
- Repair all cracks and voids to floors and walls with acid proof cement.
- Apply seal coat of Flex-Guard 250 sealer.
- Embed the polyester mat into the sealer and wet out with another coat of Flex-Guard 250 Sealer.
- After Flex-Guard 250 has set, apply a final coat of Flex-Guard 250 sealer to give a finished total thickness of approximately 1/8″.
- Caulk around all tank bottoms and pad as well as any piping that is imbedded into the concrete.
- Hides Joints and Cracks
- Continuous Weave Polyester Fabric
- Meets U.S.D.A. Requirements
- Low Odor / Solvent Free
- Resin Rich Surface for Chemical Resistance
- Adhesion to Clean, Sound Damp Concrete
- Built in Resiliency for Thermal Shock
- Excellent Chemical Resistance
Black, White, Ivory, Gray, Dark Gray, Brick Red, Beige, Green and Brown. Special colors are available upon request, for an additional charge.
As with all epoxies, good hygienic habits must be observed and the wearing of protective clothing and gloves is advised. Before using this product, please read the material safety data sheet.
All products manufactured by us are warranted to first class material and free from defects in material and workmanship. Liability under this warranty is limited to the net purchase price of any such products proven defective, or, at our option, to the repair or replacement of said products upon their return to us transportation prepaid. All claims hereunder on defective products must be made in writing within 30 days after the receipt of such products in your plant and prior to further processing or combining with other materials and products. WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, AS TO THE SUITABILITY OF ANY OF OUR PRODUCTS FOR ANY PARTICULAR USE, AND WE SHALL NOT BE SUBJECT TO LIABILITY FROM ANY DAMAGES RESULTING FROM THEIR USE IN OPERATIONS NOT UNDER OUR DIRECT CONTROL.