- Home
- Companies
- Raven Lining Systems
- Products
- AquataPoxy - Model A-6 - Epoxy Coatings
AquataPoxy - Model A-6 -Epoxy Coatings
AquataPoxy A-6 was developed in the late 70’s and is the most widely specified 100% solids, zero VOC epoxy for potable water structures, with a fast return to service. The A-6 epoxy produces a well-adhered slick, dense surface and minimizes slime growth and bacteria build-up on protected substrates.
A-6 is formulated for use on surfaces where corrosion and water resistance is needed, including:
- Potable water structures
- Secondary containment
- Tanks, reservoirs and basins
- General maintenance
- Water mains, distribution and transmission lines
Color
The standard Part A Resin is white; the Part B Curing Agent is brown. When mixed the product is an off-white color. Other ANSI/NSF 61 colors available are black, blue and gray. Green, tan and other non-certified colors are available.
Solids By Volume
- 100% solids by volume
- Volatile Organic Compounds: 0.0 pounds per gallon
Film Thickness
AquataPoxy A-6 is a 100% solids epoxy with zero shrinkage. Wet film thickness and dry film thickness are the same (i.e. 5 mils WFT = 5 mils DFT). Depending on substrate type and profile, a maximum of 10 mils of A-6 or 80 mils of A-6 Thick per coat is recommended to prevent sagging. Typical recommended thickness for immersion duty is 16-80 mils on metal and 60-120 mils on concrete. ANSI/NSF 61 maximum dry film thickness for metallic pipe service: 26 mils; for tanks 50 gallons or larger: 120 mils.
Coverage
Theoretical coverage is 160 square feet per gallon at 10 mils wet film thickness. Actual surface coverage will depend on substrate porosity and roughness. Good painting practices suggest application of two coats for quality assurance. A wet film thickness gauge may be used to determine actual coating coverage.
Application
Apply with brush, roller, airless or air-assisted spray or other suitable method. Optimal proportioning and mixing is achieved with the use of a Raven Lining Systems approved plural component airless spray system. For best results, apply this product to concrete when its temperature is stable or falling.