- Home
- Companies
- F&J Specialty Products, Inc
- Products
- F&J - Model T8400 and T8400E - High ...
F&J - Model T8400 and T8400E -High Volume Air Sampler
The T8400 (100-120VAC) and the T8400E (200-240VAC) Series Air Samplers are high volume air samplers with two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated in cubic feet per minute (CFM) or liters per minute (LPM) may be utilized to measure the flow rate. The flow rate is adjustable by use of a motor speed controller.
Most popular related searches
high volume air sampling
high volume sampling
air sampling
flow monitoring
filter holder
combination filter holder
air sampling system
vacuum blower
particulate filter
flow control
The T8400 or T8400E Air Sampling System is designed for periodic short-term indoor use. Please consult the product specifications for the design temperature range and the installation category.
- Very durable polypropylene plastic housing
- Lightweight
- Variable speed control up to full flow
- Thermally Protected Motor
- Powerful 1.4 H.P. dual ball bearing motor
- 120Volt or 230Volt models available
- Optional flow measurement gage (280 – 1980 LPM)
- Optional – Resettable elapsed time meter
- Pump Type: Two stage, through flow, thermally protected 1.4 H.P., dual ball bearing vacuum blower.
- Maximum Capacity: 90 CFM (2500 LPM) at 29.92” HG at 68ºF at zero load
- Power Requirements:
- T8400 – 110-120VAC; 50/60Hz @ 8.8 amperes; single phase
- T8400E – 220-240VAC; 50/60Hz @ 5,2 amperes; single phase
- Circuit Breaker Protection: 10 amperes
- Electrical Cord: All temperature, 3 wire, 16 gauge
- Thermal Overload Protection:
- Furnished as an integral part of the motor
- Flow Control Variable Speed up to full flow
- Exterior Housing: Heavy duty polypropylene
- Handle: Durable plastic/metal
- Dimensions: 9 ¾”L × 9 ½”W × 10 3/8”H (23,8 L × 24,1W × 26,4 cm H)
- Weight: 8 lbs. 10 oz. (4,1 kg)
- Installation Category: Pollution Degree 2
- Operating Temperature: 40º - 104ºF (4º - 40ºC)
- Storage Temperature: 32º - 122ºF (0º - 50ºC)
- Model FM50TA Flow Monitoring Gauge : A portable flow-monitoring gage (280-2000 LPM) is available
- Model HV-1SA or HV1SAP Adapter : An adapter to reduce from 102 mm diameter to 4,65 cm FPT
- Model FJ304 Combination Filter Holder : Holds 8,6 cm” D × 3 0 cm H charcoal filter and 102 mm diameter filter paper
- Model FJ2100 Filter Holder : 20,3 × 25,4 cm particulate filter holder may be utilized directly on the unit