Falcon Pumps Pvt. Ltd
- Home
- Companies
- Falcon Pumps Pvt. Ltd
- Products
- Falcon - 4" Submersible Pumpset
Falcon - 4" Submersible Pumpset
Material Of Construction - Motor: Oil Seal : Nitrile butyl rubber. Motor Shaft : SS - 420. Motor Body Pipe : J4. Motor Bush : LTB-4 / Teflon. Thrust bearing assembly : SS - 420 & Carbon. Diaphragm : High Nitrile Butyl Rubber. Motor Base : Cast Iron / SS - 304. Housing Set : Cast Iron / SS - 304.
Most popular related searches
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.
- Power Range : 0.37 kW to 4.4 kW (0.50 HP to 6.0 HP)
- Speed : 2880 RPM
- Version : Single Phase 160V to 230V, Three Phase 350 to 415V,50Hz AC Supply.(Single Phase available in 0.5 HP to 5 HP / Three Phase available in 1 HP to 6 HP)
- Head Range : 10 Mtr. To 340 Mtr.
- Discharge Range : 450 LPM to 12 LPM
- Outlet Size in Inch : 1.0” , 1.25”, 1.5” & 2.0”
- Degree of Protection : IP 58
- Direction of Rotation Minimum cooling : Counter clockwise from driving end -1ph: Electrically Reversible -3ph
- Thrust load : 0.37 kW – 0.75 kW- 650 lbs, 1.1 kW -1.5 kW -1000 lbs, 2.2kW – 7.5 kW -1500 lbs.
- Flow along the motor : 0.15 m/sec.
- Type of duty : S1 (continues)
- Method of starting : 1ph-Capacitor Start Capacitor Run (CSCR): 3ph –Direct Online (D.O.L)
- Maximum starts per hour : 20 times
- Motor portion covered with corrosive resistance Stainless steel J4 shell
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water lubricated bearing
- Thread type motor construction ensures service feasibility
- Specially designed Deep Drawn type pump ensures perfect alignment and Thereby increases the life of the pump set
- Designed for wide voltage operation
- Best alternative for JET & Compressor pump set
- Additional intermediate bearing in higher stage pumps.