- Home
- Companies
- Fiber SenSys, Inc.
- Products
- Fiber Defender - Model FD331/FD332 - ...
Fiber Defender - Model FD331/FD332 -Fiber-optic Intrusion Detection System
For a high-performance perimeter intrusion detection system designed for rugged outdoor environments, the Fiber Defender® Model FD331/FD332 Alarm Processing Unit (APU) provides a one or two zone solution. Based on the Fiber SenSys® 300 series fiber-optic system, the FD331 is a single-channel model and the FD332 is a dual-channel alarm processor capable of supporting two separate zones of sensor cable. Used with the Fiber SenSys SC-3 fiber optic sensor cable in conduit, the FD331/FD332 APU forms a complete intrusion detection system.
The FD332 APU can support sensor cable from two separate zone deployments, regardless of their applications, and enables independent control of the zones. Each channel can be programmed separately for fence line or wall deployments, and both channels support up to 5 km (16,400 feet/3.1 miles) of sensor cable.
The FD331/FD332’s digital signal processing enables detection and analysis of the sensor cable movement and vibration. An on-board digital signal processor (DSP), combined with the Fiber SenSys SpectraView™ calibration software, provides discrimination between natural phenomena and actual intrusion attempts. The Fiber SenSys pre-programmed algorithms, combined with the optional Model AN-200™ wind anemometer, allows for continuous system adjustments to compensate for the effects of wind.
- Single-channel Fiber Defender® APU
- 5km sensing cable (available separately)
- Sensor cable immune to EMI, RFI, and lightning
- 25+ configuration parameters
- Comes with SpectraView™ Calibration Software for nuisance alarm discrimination
- Ideal for high-security applications
- Optional anemometer output
- PL1-N Nuclear approved
* FD331-IP for IP-XML communications capability
- Dual-channel Fiber Defender® APU
- Sensor cable immune to EMI, RFI, and lightning
- 25+ configuration parameters
- Comes with SpectraView™ Calibration Software for nuisance alarm discrimination
- Designed for high-security applications
- Optional anemometer output
* FD332-IP for IP-XML communications capability
Applications: Industrial sites, tactical military, gated communities and industrial
- Stand-alone
- 1 or 2 zones
- No insensitive lead
Advanced tuning; US military approved to highest rating. Typically deployed near the fence line.