CleanAir - Model JUM 3-500 -FID HTC Gas Analyser

Like all of our other heated FIDs, the 3-500 is a highly reliable, highly tolerant and rugged rack or bench mounted heated total hydrocarbon analyzer. Designed for very low drift, high accuracy, sensitivity and stability. The 3-500 uses a hydrogen flame ionization detector (FID) in a heated furnace to prevent loss of high molecular weight hydrocarbons and to provide reliable performance in the analysis of high concentrations down to very low concentration levels of gaseous carbonaceous organic contaminants in emissions, air and other high purity gases and gases. All parts and components containing the sample are discreetly integrated into an easy-to-maintain heated chamber. The disposable heated sample filter is easily accessible in the rear panel and can be changed with a standard Allen wrench.

The combustion air supply for the sensor is integrated. No expensive external air generator or cylinder for synthetic air is required.
The 3-500 is a standard emission analyzer and therefore optimized for compliance with the European specifications EN-12619: 2013. Several different target optimizations for "non EN-12619: 20136" applications are available on request.

• Made in Germany
• 6-digit direct engineering unit reading concentration display; No range required
• change up to 3 measurements remotely.
• Standard data outputs VDC, mA and RS 232.
• Sample Disposable sample filter easily accessible in the rear panel for filter change without special tools.
• All components in contact with the sample are fully heated and digitally maintained at 190°C.
• Integrated sample pump.
• Integrated combustion air pump and purifier, no additional burner air cylinder is required.
• Automatic flame-out alarm contact and optional fuel shut-off valve available.
• Fast response of less than 1 second @ sample input.
• Low fuel consumption at 100% and all combustible gases mixed at 40/60%.
• Microprocessor based PID temperature controller.
• Automatic or remote range changeover is optional.

• Conformity check of hydrocarbon sources according to the European standard EN 14181 / EN
• Standards ISO 14659, EN 12619: 2013, US-EPA 25A method and method 503.
• Monitoring of hydrocarbon emissions from stack gases.
• Monitoring of hydrocarbon gas emissions.
• Monitoring Fence line (perimeter) monitoring.
• Solvent recovery monitor for carbon bed rupture.
• Catalytic converter and thermal combustion testing.
• Carbon adsorption regeneration monitoring.
• Exhaust Vehicle Gross Emissions Analysis.
• Monitoring of contamination by hydrocarbons in air and other gases.
• Detection of traces of hydrocarbons in purity gases used in semiconductors.
• the industry.
• LEL monitor of solvent-laden air.
• Measure engine combustion efficiency.
• Monitoring THC / CH4 emissions from mobile cars under driving conditions. Requires ICM option.