VIG Industries
- Home
- Companies
- VIG Industries
- Products
- VIG Industries - Model 10 - FID Single ...
VIG Industries - Model 10 -FID Single Channel Spot Heated Total Hydrocarbon Analyzer
FromVIG Industries
The VIG Industries, Inc. Model 10 is a microprocessor based, spot heated total hydrocarbon gas analyzer designed for high accuracy, sensitivity and stability. The Model 10 uses a flame ionization detector (FID) for continuous measurement of a dry sample stream at ambient temperature. The FID is spot heated to prevent condensation, and to provide repeatable, reliable performance in the analysis of a wide variety of hydrocarbon concentrations in gaseous mixtures or in ambient air.
Most popular related searches
heated total hydrocarbons analyzer
total hydrocarbons analyzer
flame ionization detector
hydrocarbons analyzer
zero air generator
total hydrocarbons gas analyzer
volatile organic compounds
heated hydrocarbons analyzer
zero air
flame ionization detector hydrocarbons analyzer
- Compliance Monitoring
- Process Monitoring - Continuous monitoring and alarm or control of:
-
Process gas streams utilizing organic solvents
- Crude oil
- Other chemicals containing hydrocarbons
-
- Efficiency Monitoring - Monitoring effluent of volatile organic compound (VOC) reduction equipment for:
- Environmental compliance
- Efficiency control of incinerators (Thermal or catalytic)
- Scrubbers
- Carbon absorbers
- Monitoring of catalytic converters
- Combustion and diesel engine efficiency
- Other abatement equipment
- Safety Monitoring - Lower explosive limit (LEL) monitoring and/or control of:
- Ovens/dryers
- Fugitive emissions monitoring
- Personnel work area monitoring
- Leak detection of process equipment or solvent storage areas
- Stack Monitoring
- Easy to use software
- Automatic start-up/ignition
- Automatic ranging
- Automatic fuel and sample shut-off system
- Automatic flame-out indicator
- Adjustable alarm settings
- Precision 1% of full scale
- Fast response - within 5 seconds to 90% of full scale
- Two stage sample filter with exchangeable stainless sintered steel elements
- Teflon isolated detector (FID)
- 19" rack or bench mount
- Sample pump
- Outputs 0-1, 0-5, or 0-10Volts
- Choice of Hydrogen or Hydrogen/Helium fuel
- 4-20mA output - no extra charge
- Automatic calibration
- Automatic ignition
- Automatic purge
- Built-in internal cleaning system
- External zero air generator
- Internal combustion air supply
- Internal dilution system
- Multi-point sequencer
- NEMA rated enclosures
- Range recognition relays
- RS-232 interface
- Sample shut-off
- Second concentration level alarm
- User selectable fuel (hydrogen or mixture hydrogen/helium)
- The user selectable fuel option allows the end user to select between pure hydrogen and a hydrogen / helium mixture for the analyzer"s fuel supply. This is all done internally by the microprocessor simply by pressing a key on the front panel. The analyzer will automatically adjust the fuel flow to accommodate the selected fuel.
- Zero and calibration input ports
- Zero and calibration solenoids with software
- Zero air generator (Reduces bottles)
- Hydrogen generator (Reduces bottles)
- Heated sample lines and controllers
- Strip chart recorders and data loggers
- Analysis Method: Flame Ionization Detector (FID)
- Precision: + / - 1% of Full Scale
- Response Time: Within 5 Seconds to 90% of Full Scale
- Zero Drift: +/- 1% of Full Scale Per 24 Hours
- Span Drift: +/- 1% of Full Scale Per 24 Hours
- Linearity: Within 1%
- Oxygen Synergism: Within 1% of Selected Range
- Ranges: 0-100, 1000, 10000, 100000
- Display: Backlit Digital / Graphical LCD
- Outputs: Both 4-20mA & 0-1, 5, or 10 Volts
- Alarms: Flame Out & Concentration, Latching
- Safety: Flame Out Indicator with Fuel Shut-Off System
- Sample Pump: 6 Liters / Minute or optional 14 Liters/Minute
- Fuel: Hydrogen (UHP Grade) or Upon Request, Hydrogen / Helium (40/60 UHP Grade) 18PSI
- Combustion Air: Zero Grade Air 10PSI
- Operation Air: Compressed Air (Instrument Air - Dry / Oil-Less) 60PSI
- Zero Gas: Zero Air (UHP Grade) 10PSI
- Calibration Gas: User Selected 10PSI
- Power: 115Vac, 60Hz or optional 220Vac, 50Hz
- Ambient Temperature: 32 to 110º F
- Dimensions: 19"W x 18"D x 7"H
- Weight: 35 LBS