Texcel - Model QAMS Dust Master Pro 7000 -Five Channel Particle-Counter

The advanced pump system provides accurate data with quiet operation due to consistent 5LPM flow rate and pulsation dampening technology.

The 5LPM flow rate ensures even heavier particles remain entrained to be collected onto the 37mm filter paper giving highly accurate results.

On-site operation is made easy with the quick deploy design, graphical display and dedicated keypad with intuitive menu.

New and extremely powerful Visual Master Pro software makes remote operation a breeze with live data viewing, data download and complete instrument control allowing you to adjust settings, start and stop monitoring, set alarms/alert thresholds and more, all from the comfort of your office.

• Manufactured in Australia
• Easy field calibration available via Automatic Field Calibration Mode
• Heated inlet and Moisture trap: Eliminates moisture interference on readings and chance of water damage.
• Simultaneous measurement of Total PM, PM10, PM4, PM2.5 and PM1.
• TES EPA Mode: Schedule “hours on” and “hours off” to set automatic 3 or 6 day runs and eliminate the need for manual start/stops.
• Lufft Weather Sensor Compatibility: Eliminate the need for additional data loggers by using the DMP7000 to log all met parameters.
• RH controlled heated inlet along with a unique in-line water trap eliminates moisture interference
• Annual factory service recommended. No other maintenance required
• Mains, battery or solar power option
• In-built data logging capability
• Remote data access via 3G modem
• Easy to set alarm capabilities through SMS messaging to mobile phone, external siren or visual beacon

Particle Size Range 0.2um to 18um

Relay Contacts  3 relay contacts (NC/COM/NO), Alarm 1 set point, Alarm 2 set point, Instrument fault alert, Max. contact switching 5A for Alarm Capabilities

Dust Measurement Range 0.001 to 10mg/m3 (internal dilution available)

Alarm Capabilities SMS messaging to mobile phone, external siren, visual strobe light and email alerts. Carrier charges may apply.

Simultaneous PM Fraction Measurements Simultaneously measures all 3 popular PM fractions; PM2.5, PM10 and Total PM with option to add PM1 and PM4. Other PM fractions available upon request.

Enclosure Type  NEMA4 / IP66 rated, excluding heated inlet and exhaust Display Type 128 x 64 bit low energy graphical LCD display

Measurement Resolution 0.001mg/m3 (1ug/m3)

Keypad / User Interface 12 button function with keys

Flow Rate  5.0 litre per minute (default), user adjustable from 3to 8 lpm  Flow Accuracy Precision automatic flow control to within +/- 1%  Single Pump System With internal solenoid valve to control internal purge cycle every 30 minutes as standard

Tripod or Post Mounting May be easily mounted on a 50mm diameter post or on a TES transportable heavy duty tripod

Barometric Pressure Built in barometer for ambient static pressure measurements for precise flow control

Optional Inlet Jets PM2.5, PM10, Total PM – supplied with unit

Data Download  Data is polled or, upon special request, automatically and continually pushed to your server.

Heated Inlet Precision heated inlet controls inlet temperature to ensure sampling at 45% Relative Humidity max.

Gravimetric Filter Sampling Integrated filter holder, 37mm filter cartridge

Calibration Method Fully calibrated to ISO12103-1 international standards

Data Logging Interval and Internal Memory Fully user adjustable from 5 to 999s Ability to store over 2 years of time and date stamped 10 minute data captures from a single PM channel. Note, actual storage depends on the application as it will vary depending on additional parameters

Power Options

• Mains Power – Operates from 80 to 260 VAC and is fully weatherproof.
• Battery Power – Standard or Portable. Includes rechargeable battery, regulator and battery box. ‘Standard Battery System’ provides approx 210 hours of operation with the inlet heater OFF or 70 hours with the inlet heater ON.
• Solar Power System provides continuous operation based on average of >4.5 hours of sunlight per day, and will continue for up to 3 days no sun. System includes Solar Panel & Stand, Battery & Battery box, Regulator

NIOSH 5040 Capable Sampling Yes, using 37mm filter cassette

Weight System 7Kg  Heated inlet 1.5Kg

Web Based Data Collection Optional

Dimensions – System

• Width 300mm
• Depth 200mm
• Height 350mm

Meteorological Inputs

Up to 3 Lufft instruments can be integrated – eachwith multiple channels including wind speed, wind direction, humidity, temperature, precipitation, barometric pressure, solar radiation, evaporation, sigma theta, lightning & more.

Dimensions – Heated Inlet

• Length 500mm
• Width 48mm

Digital Inputs/Inputs

• 3 optically isolated inputs, voltage free, 1 x RS232, 2 x Analogue (0 to 2.5 volt standard, 0 – 5 volt optional, or 4-20mA [jumper selectable]), 2 x Counter Channels, 2 x PT100 & 1 x SHT75X inputs included.

Operating Conditions -10 to 50°C temperature range , 0 to 95% humidity range

Communications

• 1 x RS232 digital port
• Analogue
• Modbus TCP (optional)

Annual Calibration

TES’ unique design gives you a low-cost for calibration. Instead of returning the entire monitor, you can choose to return only the optical engine for annual calibration.  The calibrated optical engine will be returned to you with a new pump and a replacement internal filter. You can then perform temperature, pressure and flow calibrations to complete the process. Alternatively, TES can perform the entire calibration.

Outputs  3 x Analogue Outputs (0 to 2.5 volt standard, 0 – 5 volt optional, or 4-20mA [jumper selectable]), 1 x RS232 Output, Ethernet Module Optional, 3 x Solid State Relays for Audio and Visual Alarms

• Governments & Authorities
• Consultants & Engineering
• Civil & Construction
• Mining & Quarries
• Logistics, Ports & Terminals