- Home
- Companies
- Fluimac s.r.l.
- Products
- Fluimac Phoenix LOTUS - Model L 10 - ...
Fluimac Phoenix LOTUS - Model L 10 -Diaphragm Pump
Fluid connections: 3/8” BSPP. Air connection: 1/4“ BSPP. Max. Flow rate: 24 lt/min. Max air pressure: 7 bar. Max delivery head: 70 m. Max Suction Lift Dry: 4 m. Max Solid passing: 3 mm. Noise level: 65 dB. Max Viscosity: 15.000 cps. Material: PTFE, PTFE+CF, PE, PE+CF e PURE PP.
ATEX CERTIFICATION ZONE 2
- II 3/3 G Ex h IIC T4 Gc
- II 3 D Ex h IIIB T135°C Dc X
ATEX CERTIFICATION ZONE 1
- II 2/2 G Ex h IIC T4 Gb
- II 2 D Ex h IIIB T135°C Db X
Performance Curves
To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory:
The required flow rate of the fluid (Flow rate l/min)
The total prevalence (Head H)
By determining the flow rate of the fluid (Flow rate lt/min) and the head (Head H) it is possible to identify a point of intersection between the two. This point allows you to identify the quantity of compressed air necessary for the correct functioning of this type of pump; to do this it is necessary to follow the blue curve to the left. Then following the closest green curve you can see the air consumption.
- PTFE: Temperature: -20°C +120°C
- PTFE+CF: Temperature: -20°C +120°C
- PE: Temperature: -20°C +60°C
- PE+CF: Temperature: -20°C +60°C
- PURE PP: Temperature: -5°C +65°C