Flux-Geräte GMBH / Flux Pumps
- Home
- Companies
- Flux-Geräte GMBH / Flux Pumps
- Products
- Flux-Geräte - Model F 425 / FP 425 - ...
Flux-Geräte - Model F 425 / FP 425 -Backflow Valve Drum Pump for Optimum Media Usage
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas.
Most popular related searches
drum pump
backflow valve
hazardous area
hazardous area product
waste disposal cost
drum pump motor
backflow
barrel pump
waste disposal
coring tube
- Flow rate: max. 120 l/min1
- Delivery head: max. 26 mwc2
- Viscosity: min. 1 mPas - max. 1200 mPas2
- Outer tube diameter: min. 41 mm3 - max. 50 mm3
- Immersion length: 700, 1000, 1200
- Materials outer tube: hastelloy C, Polypropylene, Stainless steel
- Media / Fluids: Acids, Alkalis, Fuels, Highly flammable media, Petroleum products, Solvents
- Seal: with mechanical seal
- Container: 1000 l IBC, 200 l drums
- With backflow stop
- Two adjusting levers to easily close the backflow stop
- With mechanical seal for seal of inner tube
- Metal core in the inner tube at the PP version
- Versions for use in hazardous areas available
- Grease-lubricated shaft bearing
- Can be combined with various motors as required
- Optimal residual emptying with e.g. less than 0.05 l residual amount left in 200 l drum
- No tilting to totally empty the drum
- Reduction of cleaning and waste disposal costs
- No loss of medium when taking the pump from drum to drum
- Optimal use of fluids
- Unique, only at FLUX: the inner tube reinforced by a metal core at the PP version. It prevents leakage and unnecessary wear of the mechanical seal in all operating temperature ranges.
- Can be temporarily operated against closed valve (hand nozzle, valves etc.) until the indicated temperature of the materials is reached
- Stainless steel and hastelloy C version can be used in hazardous areas