Gamma Meccanica - Model Trim-Co - Cutter Compactor
From Plastics
The Trim-Co is the smallest line made by Gamma Meccanica. As all the lines belonging to the COMPAC range, Trim-Co consists of a cutter-compactor, extruder and a pelletizer. The Trim-Co is designed to regenerate materials such as film, fibers, fabrics and yarns. The line is particularly suitable for regenerating HDPE, LDPE, PE and PP in the shape of film, shopping bags, small cut reels and production waste.
-
Most popular related searches
Gamma Advantage
Works in line with the production equipment and off line as well.
Feeds aspirated trim material to the top.
Has an optional nip roll feed for roll stock and can be fed via a small conveyor for off-line applications.
Works with a 50 mm extruder that can quench pellets with air or use a small water ring unit.
Extrudes a uniform pellet not agglomerate.
TDA 2.0 With NEW Centrifuge
TDA pelletizer is available in sizes 1.0 and 2.0 for small production capacities, especially for masterbatch, compounding or workshop productions.
At the end of the line a TDA 2.0 die face cutter has been installed, refined and interpreted to suit specific needs. Thanks to a new design of the centrifuge connected to the die face cutter to dry the granules, the system is very suitable for the production of masterbatch.
Three-stage cleaning operations for centrifuge, tank and rotor necessary after each color change can be done thoroughly in about 15 minutes.
A New Concept of Centrifuge
The compact dimensions have made it possible to design the centrifuge in such a way that the cleaning operations for the colour change are extremely easy. In about 15 minutes the centrifuge and the tank can be cleaned completely in just three steps, including the rotor, simply by loosening one screw.
This model of centrifuge can be installed in other machineries.
Customer reviews
No reviews were found for Gamma Meccanica - Model Trim-Co - Cutter Compactor. Be the first to review!