Chrysalis Scientific Technologies Inc.
- Home
- Companies
- Chrysalis Scientific Technologies Inc.
- Products
- NANOCHEM - Model H/HP-Series - Gas ...
NANOCHEM - Model H/HP-Series -Gas Purifiers
The NANOCHEM H/HP-Series Purifiers provide economical gas purification in multi-tool or single-source applications. With a welded bypass valve incorporated in the purifier unit, H/HP-Series purifiers are often used in gas enclosures, both source and purge gas, where space is limited. Its low width makes it ideal for installation in restricted space or gas jungle applications where multiple vertical gas lines are being run. Purification media refills are available through Matheson Tri-Gas, Inc.
Most popular related searches
gas purification
pneumatic actuated diaphragm valve
pneumatic actuator valve
actuated diaphragm valve
gas purification system
diaphragm valve
pneumatic actuator
corrosive gas
particle generator
particle filter
- Purification for all ultra-high purity applications
- Highest Lifetimes
- Best Impurity Removal Efficiencies
- Removes critical contaminants to sub parts-per-billion level (< 0.1 ppb in inert gases)
- End-Point Detection available (H-Series)
- Enhances manufacturing process economy and improves equipment performance
- Provides consistently high purity gas under fluctuating inlet impurity conditions
- Improves component lifetime and reduces particle generation by removing moisture and volatile metals from corrosive gases
- No moving parts or power requirements
- Easy to operate
- Built-in 1-valve bypass
- Does not require heating or cooling
- Low overall cost of ownership
- Media refills available for all sizes
- Inlet and outlet springless diaphragm valves
- All metal parts, Type 316L stainless steel, nickel and Elgiloy valve diaphragm
- 0.003 urn particle filter with 99.9999999% retention (PTFE or 316L SS)
- Internal surface finish < 15 pin Ra
- H-Series: Maximum allowable working pressure of 150 psig (1.13 MPa)with the fiber optic end-point detector or 500 psig (3.5 MPa) without detector
- HP-Series: Maximum allowable working pressure of 2850 psig {19.7 MPa)
- Maximum operating temperature of 70°C
Connections
- Female inlet and male outlet `/4 inch VCR-compatible face sea fittings
Options
- Fiber optic end-point detector indicates when it is time to replace the purifier {for non-corrosive gases only)
- Pneumatically-actuated diaphragm valves
- Manually or pneumatically-actuated bellows valves