Genesol - Model 703 -Membrane Cleaner (Alkaline Powder)

• Genesol 703 is highly effective when used as a 2 - 3% solution at the highest pH permitted by the membrane manufacturer. Genesol 703 should be alternately soaked and recycled through the membrane system for 4 - 6 hours. Cleaning with warm cleaning solutions will considerably improve the cleaning performance. After cleaning, the membrane system should be thoroughly flushed out, until the pH values of the feed and the discharge are the same.
• Cleaning solutions using Genesol 703 have a tendency to foam.
• Genesol 703 can be diluted and is soluble to ~27% w/w in water at 20ºC.

Health and Safety

Genesol 703 is a powder blend of mixed cleaners, including a surfactant, fully biodegradable sequestrant and inorganic phosphate. It is compatible with carbon steel and commonly used materials of construction in membrane plants and CIP installations. A material safety data sheet is available on request.

Classification

• CHIP: Corrosive
• UN: Corrosive

Typical properties

• Appearance: white powder
• pH of a 2%solution: 12.0
• Bulk density: 0.95
• Freezing point: not applicable

Packaging

• Available in 10 kg and 25 kg drums.
• The shelf life is two years under normal storage conditions. Ensure the drums remain well sealed and the Genesol 703 remains dry.