GroPoint - Model SDI-12 -GP-BTDL Bluetooth Data Logger Kit
This kit will allow you to connect four SDI-12 Sensors. To connect eight sensors, you will need an additional M12 Male to Female Cable and 4-Port Expansion Bar, as well as a 2-Port Expansion Bar. Sensors must terminate in an M12 connector. This kit uses the free GP Reader Android App. The free GP Reader app (available for Android devices only) is used to check current conditions, download data and set up the sensor sampling interval (from one minute to 12 hours). With the app open on your smartphone, simply push the button on the GP-BTDL Bluetooth SDI-12 Data Logger to wake it up and automatically establish a wireless connection. Tap the Download button in the app to download all logged data. You can also check the current battery level of the Bluetooth Data Logger.
The GP-BTDL Bluetooth SDI-12 Data Logger Kit includes:
- Bluetooth SDI-12 Data logger
- 4-Port SDI-12 Expansion Bar
- M12 Male to Female Cable
- 3.6V C-Cell Battery.
- Connects up to 10 SDI-12 sensors (via multiple 4-Port SDI-12 Expansion Bars)
- The Bluetooth SDI-12 Data Logger is both a data logger and a wireless access point to retrieve data
- Logger operates on Primary C-Cell battery (3.6V - Cold Temperature Battery) - Battery Not Included
- Free GP Reader app available for Android devices (iOS coming soon).
- Retrieve sensor data wirelessly to your smartphone with a quick visit to the site
- Stay connected up to 60m (200 ft) away
- Operates with a Primary C-Cell battery (3.6V or 21.5 V alkaline)
- Battery life of several years is typical
- Water-resistant, IP65-rated enclosure
- Data is retained even with no battery
- Free GP Reader App available for Android devices
Part Name and Quantity: Part No.
- 1 x GP-DLBT Bluetooth SDI-12 Datalogger: Part 2992
- 1 x M12 Male to Female Cable: Part 2999
- 1 x 4-Port Expansion Bar: Part 2998
- 1 x Li-SOCi2 C-Cell Battery: Part 6230
- Output: CSV text file via USB cable (included)
- Sensor interface: SDI-12 / RS-485 (SDI-12 version)
- Sensor port connector: 1x Switchcraft EN3P4F (4 female pins)
- Maximum number of sensors:
- 10 (via multiple 4-Port SDI-12 Expansion Bars)
- Depending on measurement interval and type of sensor, additional sensors may be configured.
- Up to 60 SDI-12 sensors may be configured depending on cable length and sensor power requirements
- Wireless protocol: Bluetooth 4.0 LE
- Storage:
- 4 MB
- This is the equivalent of:
- 200K GroPoint Lite measurements
- 80K moisture and temperature measurements from a GroPoint Profile 4-segment sensor
- Measurement interval: Configurable by user
- Range: 1 minute to 12 hours
- Operating temperature range: -20°C to 65°C (-4°F to 150°F)
- Storage temperature range: -20°C to 70°C (-4°F to 160°F)
- Power:
- 3.0V lithium coin cell powers the memory (included)
- 2 x AA alkaline batteries OR 3.6V 1x C-cell Li-ion battery powers the sensors (included)
- Battery life: Up to several years, depending on measurement interval and battery selection
- Dimensions: 11.4cm x 8.0cm x 6.0cm (4.49” x 3.15” x 2.36”)
- Weight: 216 g (7.62 oz)
- Warranty: 1-year limited parts and labour
- Environmental sealing:
- Enclosure: IP65
- Push button: IP67
- Sensor connectors: IP66/IP68
- Order Number: Part 2992-KIT