Badger Meter, Inc.
- Home
- Companies
- Badger Meter, Inc.
- Products
- Hedland - Flow-Alert Reed Switch
Hedland - Flow-Alert Reed Switch
Flow-Alert Reed Switch; No mechanical linkage. Provides output to signal alarm if flow is too high or too low. Flow ranges: 0.5 - 5.0 SCFM (0.2 - 2.2 L/SEC) up to 100 - 1000 SCFM (50 - 475 L/SEC). Construction: Aluminum, brass and T303 stainless steel. Sizes: 1/4 to 1-1/2 inch ports. Ports: SAE, NPTF and BSPP. Pressure up to 1,000 psi (69 bar) maximum. Temperature up to 240 °F (116 °C). Accuracy ±2% full scale. Repeatability ±1%.
Most popular related searches
flow switch
shock and vibration
flow meter
epoxy coating
gas meter
gas flow meter
gas flow monitoring
gas flow switch
calibration standard
mechanical switch
- Standard calibration: 1.0 specific gravity
- Install in any position
- Easier to read linear scale
- No flow straighteners or special piping required
- Relatively insensitive to shock and vibration
- Housing: Anodized and epoxy-coated aluminum with polycarbonate lens
- Rating: NEMA 12 and 13 (IP52/54)
- Reed switch options: Single(1) or Double(2) prewired single-pole, single-throw (SPST-NO) normally open or single-pole, single-throw (SPST-NC) normally closed
- Connection: 4 pin (Protection Class IP65)
- Includes: Basic flow meter with Flow-Alert flow switch
- Optional: Special scales available