Heinrichs Messtechnik GmbH
- Home
- Companies
- Heinrichs Messtechnik GmbH
- Products
- Heinrichs - Model Type: BA - Liquid ...
Heinrichs - Model Type: BA -Liquid Level Meter
The BA-type liquid level meter is suitable for level measurement of liquid products in open or pressurized vessels. The device is based on Archimedes’ buoyancy principle.
Most popular related searches
liquid level meter
level monitoring
safety system
process monitoring
process monitoring system
conductivity level controller
explosives measurement
area monitoring
- Level measurement, monitoring, regulation and control.
- Especially because of its design, the BA is suitable for processes under difficult and rough operating conditions.
- For process monitoring and regulation, the units are available with additional electrical equipment.
- Wide range of wetted materials
- High pressure design
- Clear 90°-scale
- Stainless steel display
- Can be used in the Category 2 potentially explosive area
Body
- Materials: Stainless steel, Hastelloy (others on request)
- Process connection: DN50 flange acc. EN 1092, ASME B16.5, DIN2512, (others on request)
- Nominal pressure: PN 40, ASME Cl150 / 300
- Process temperature: -40°C up to +250°C
- Ambient temperature: -40°C up to +80°C
- Ingress protection: IP 65 (EN60529)
- Density range: 400?2.000 g/l
Display:
- Aluminum (enamel finish)
- Stainless steel
Output signal:
- inductive limit switches
- induktive limit switches (safety technology)
- micro switch (others on request)
- ES Transmitter
- Power supply: 14…30 VDC
- Outputs: passive, galvanically isolated
- Analog: 4…20 mA
- Binary 1 and 2: Ui=30 V, Ii=20mA, Pi=100 mW
- Input binary: Counter reset (only for ES with counter module)
- Ambient temperature: -40°C up to +70°C
- Ingress protection: IP 20 (EN60529)
- Communication
- HART-protocol
- HART-protocol and 2 NAMUR-switches
- HART-protocol and 1 NAMUR-switch / pulse output
- HART-protocol and counter module
- Profibus-PA
- Foundation Fieldbus
- Ambient temperature:
- -40°C up to +80°C (without switch)
- -40°C up to +65°C (with switch)
Accuracy
- ± 5 mm of actual value
- ± 0,2% with transmitter (ES)