Julius Montz GmbH
- Home
- Companies
- Julius Montz GmbH
- Products
- MONTZ - Model Type MN - High ...
MONTZ - Model Type MN -High Performance Packing
The properties and areas of applications of the high performance packings Type MN and M are not fundamentally different from standard packings. Established operational experiences and areas of applications remain valid.
Most popular related searches
air decontamination
process waste
packed column
contaminants absorption
oil waste
process water
waste oil processing
manhole
waste processing
decontamination
Separation steps:
- Depending on type, >8 theoretical separation steps per meter are achieved.
Column data:
- Diameter from 40 mm up to 10 m and wider
- Liquid load from 100 l/(m² h)
- Operating pressures from vacuum up to more than 100 bar
- Minimum liquid hold-up
Assembly:
- Packing layers are manufactured individually or in segments. Packing installation is done through column shell flanges or manholes, as desired.
Materials:
- Stainless steels such as 1.4000, 1.4301, 1.4404, 1.4571, 1.4435, 1.4539 and others
- C-steel
- Hastelloy C4, C22, C276, etc.
- Aluminium, Copper, Titanium, Monel, Tantallum, etc.
- Additional materials are available upon request
Properties:
- Increased throughput capacity
- High flexibility
- High separation performance, close to capacity limits
- Liquid loads from 0.1 up to more than 250 m³/(m² h)
Applications:
- Vacuum columns
- Atmospheric columns and high pressure columns
- Absorption of components and contaminants from gas flows and air flows
- Natural gas drying with glycols
- Refinery columns (atmospheric and under vacuum)
- Petrochemical columns
- Exhaust air decontamination in Aluminium rolling mills
- Lubricating oil and rolling oil processing
- Waste water stripper
- Retrofit of existing plate columns or packed columns for performance improvement