VASU - Model VTEMP Series -High Temperature Paints

• VTEMP 200 is a single component high build coating based on multi polymeric composite
• VTEMP 200 is specifically designed for protection of surface operating upto 175oC under insulation
• VTEMP 200 forms a tough and durable film which is highly resistant to thermal shocks and thermal cycling. Pencil Hardness of 4B in ambient and 7H in service is achieved
• VTEMP 200 can be applied directly to ambient and to hot substrates having a metal temperature up to148?C thus reducing down times or shutdowns.
• VTEMP 200 is dark grey in color and can be top coated with VTEMP TIC 177 THERMAL INTERFACE COATINGS and INSULATING COATINGS. 

The dried coating is durable and tough in nature and as such adhesion test should be performed in accordance with ASTM 3359 -09. , results to 5B.

CARBON STEEL Carbon steel surfaces to be coated with VTEMP 200 should be dry and free of all weld splatter, oil, dirt, grease and all other contaminants, especially salts. Round off all rough welds and sharp edges. Dry abrasive blast clean to an SSPCSP 6, “Commercial Blast” (Sa 2) with 38 to 63 micron profile. Wet abrasive blast or UHP wash with grit injection to achieve an equivalent of an SSPC-SP 6 (Sa-2).

If abrasive blast preparation is not possible, use SSPC-SP 11, power tool cleaning to bare metal. Higher the cleanliness, better would be the performance of the coating. 

MIXING, THINNING AND CLEANUP:

VTEMP 200 is a Single component product with 52 ± 2% volume solids. Use mechanical mixing until the material becomes free flowing and smooth without any lumps; and as needed during application. Be sure any settled solids are incorporated during mixing.