HOMA - Model C80 -Drainage Pumps
The C 80 scavenger is suitable for irrigation, water transfer and drainage in clear water. For flat-water exhaust to min. 2 mm. Pumping water from collection tanks, for flood relief and water removal from water courses or reservoirs. Suitable also for water circulation in garden ponds and cascades.
Application
- Irrigation, water transfer and drainage
- in clear water. For flat water exhaust to
- min. 2 mm.
- The water jacket cooled
- motor with the top discharge
- protects the motor against overheating
- even during sip operation.
Installation: permanent or
transportable
Pumped medium: Clear water
containing soft solids with
a diameter of max. 1 mm. Max.
medium temperature 308 K, short
term up to 333 K.
Operation: permanent
Design
Fully submersible pump consisting
of:
Pump: Single stage centrifugal
pump with vertical discharge R ¾" AG.
Impeller: Open multi-channel
impeller, spherical clearance 1mm
Motor: canned wet-rotor, seal-less,
rotor shaft lubricated by pumped
liquid. Insulation class B. Motor
protection IP 68.
Shaft/bearing: stainless steel-ceramic
shaft, slide bearing
Materials:
- Suction strainer: Wear resistant synthetic material
- Impeller: Glass-fibre, reinforced synthetic
- Motor housing: Stainless steel
- Motor casing: Wear resistant synthetic material
- Motor shaft: Stainless steel
- Bolts: Stainless steel
- Elastomeres: Nitrile Rubber
Equipment supplied
- Pump with 10 m of cable and plug
Technical Data:
- Flow : 0.8 - 0.0
- Head : 0.0 m - 4.0 m
- Power input P1: 0.09 kW
- Power output P2: 0.05 kW
- Frequency: 50
- Rated voltage: 230 V
- Rated current: 0.8 A
- Discharge Port: R ¾" AG
- Weight: 2.5 kg
- Nominal speed: 2900 1/min
- Cablt type: H05RN-F - 3G0,75
- Cable lenth: 10 m