HT - Model M75 - Installation Safety Testers
Multifunction TRMS DMM, Safety test on electrical plants and Wire mapping Test on LAN cables. M75 is an innovative instrument which joins together DMM, Safety Tester and LAN checker features inside a compact and ergonomic user-friendly structure and with a extremely reduced weight (800g only!). The DMM is a professional instrument with TRMS measurement of AC/DC voltage, AC Current (through external clamp), Resistance and Frequency. Additional features are MAX/MIN/AVG function, HOLD function and PEAK detection with Response Time of 1ms, useful for surge currents detection.
-
Most popular related searches
The Safety Tester features allow to perform test o...
The Safety Tester features allow to perform test on electrical plants according to VDE0413. Measures of Continuity, Insulation, Global Earth value (also with 0.1 resolution), RCDs test, phase sequence indication and phase coincidence (using only one Test Lead even just touching even insulated cables or two Test Leads) will be easily performed thanks to this new extremely compact instrument. An innovative function (AUTOTEST) automatically performs main safety checks in the plant (Earth Resistance measurement, RCD Test, Insulation Test) just connecting the instrument to a socket and pressing the GO button. The instrument will give you a final response (OK or NOT OK) about the safety of the plant under test.
Finally the LAN checker function allows you to check if the wire mapping in a LAN cable is correct or not with easy indications about the found errors, which will guide you though the troubleshooting. M75 is completed by a modern selector function knob, a large numeric display for easy readings of measurements and a protection rubber holder to prevent accidental damaged.
Function
- DC Voltage
- AC TRMS Voltage
- AC TRMS Current with External Clamp
- AC TRMS Leakage current with external clamp (optional)
- Resistance
- Continuity test with buzzer
- Frequency with test leads
- Frequency with external clamp
- MIN/MAX/AVG functions
- PEAK function with response time 1ms
- HOLD function
- Continuity test of protective conductors with 200mA
- Insulation Resistance measurement with 500VDC
- Trip-out time of RCDs type AC Standard
- Global Earth Resistance without RCD tripping
- Global Earth Resistance with 0.1Ohm resolution
- Phase sequence indication at 1 or 2 wires
- Phase coincidence indication at 1 or 2 wire
- Automatic test of global earth resistance + RDC test + Insulation test
- Wire mapping test on LAN cables with RJ45 connector
- Auto Power OFF
Accessories
- KIT0075 : Set 2 cables with leads + 2 alligator clips
- C2075 : Cable 2 wires with Shuko plug
- CH1 : Remote unit #1
- CH2 : Remote unit #2
- Patch cable RJ45, FTP, 20cm, 3 pcs
- HT4003 : Rigid clamp 400A AC, diameter 30mm
- BORSA75 : Carrying bag
- ISO9000 calibration certificate
- User manual on CD-ROM
- Quick reference guide
Optional
- HT96U : Rigid clamp 1-100-1000A AC, diameter 54mm
- HT4004N : Transducer clamp 10-100A DC
- Alligator clip black, 4 pcs
- REM3 : Remote unit #3
- REM4 : Remote unit #4
- REM5 : Remote unit #5
- REM6 : Remote unit #6
- REM7 : Remote unit #7
- REM8 : Remote unit #8
- REM38 : Remote units from #3 to #8
- NOCANBA : Adapter Hypertac female/banana male
Standards
- EMC 2004/108/CE Directive
- 16th edition
- CE MARK
- EN 61008
- IEC/EN61557-1
- IEC/EN61557-2
- IEC/EN61557-3
- IEC/EN61557-4
- IEC/EN61557-6
- IEC/EN61557-7
- LVD 2006/95/CE Directive
- TIA 568B
- VDE 0100
Customer reviews
No reviews were found for HT - Model M75 - Installation Safety Testers. Be the first to review!