- Home
- Equipment
Refine by
Environmental Equipment & Supplies
112 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO AUTO-CAL 230 Power Pac delivers simple, reliable point-level detection with the convenience of automatic calibration. Operating on 230 VAC, it uses a magnetic trigger so setup and testing can be completed in minutes without removing the cover. Designed for precision, it offers sensitivity down to 0.5 pF and an adjustable time delay of up to 10 seconds to virtually eliminate ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Mini-Rotary single-vane, stainless steel rectangular paddle turns in a 4” diameter, paddle blades are 1.2” wide wide for 8 mm ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-120 - Vibrating probe level sensor with 7.37” insertion length, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch with heavy duty .031” thick, black neoprene diaphragm, internally mounted. The BM45 standard pressure switch alerts to high or low levels in bins containing non-hazardous, free-flowing dry ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21-X - Vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light; CSA C/US listed for Class ll, Groups E, F, & ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
MR-I-110 - Mini-Rotary 110 VAC with single-vane, stainless steel rectangular paddle, complete with SPDT contacts. This economical and compact mini rotary paddle level indicator is designed for controlling material levels in smaller bins and hoppers where other types of equipment simply won't ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch with heavy duty .031” thick, black neoprene diaphragm, externally mounted with DPDT contact. Does not have hazardous location ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The SBR II 115 is a microprocessor-driven SmartBob II remote sensor with 115 VAC, a corrosion-resistant polycarbonate enclosure, and an air inlet port. It is hazardous location approved and C/US listed for Class II, Groups E, F, and G. The AO models do not have hazardous location ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Side mount extension for thick bin walls. Side mount the BMRX rotary through thick concrete walls using a 6”, 8”, or 12” extended drive shaft. This extension includes a protective shaft guard with a sealed bearing end to support the shaft and prevent material from packing in the extension and causing false alarms. Consult with a BinMaster expert to configure the ideal rotary for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter Galvanized shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
GRMP-8 - 0° 1-1/2” NPT Stainless steel mounting plate with half ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Extended rotary protects against overfilling. Vertical extensions are used for top-mounted BMRX rotaries to get high-level alerts. Custom extensions are available up to 144”. Top-mounted, vertically oriented extensions measure further down into the bin to prevent overfilling or protect valuable continuous level sensors at the top of the bin. Consult with a BinMaster ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BM-25-R diaphragm switch is a pressure switch for high or low-level alerts in bins containing non-hazardous, free-flowing dry materials. It is mounted ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Diaphragm switch with heavy duty .031” thick, black neoprene diaphragm, externally mounted. The BM45 standard pressure switch alerts to high or low levels in bins containing non-hazardous, free-flowing dry ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Mini-Rotary 4-vane, polycarbonate paddle turns in a 3.2” diameter, paddle blades are 1.25” wide for 8 mm ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster ProCap I-3A Power Pac is designed for sanitary, point-level detection in food and dairy processing. Built to meet 3-A requirements, it ensures reliable performance while maintaining strict hygiene standards. A universal power supply, bright LED status light, and “Quick-Set” calibration make installation and operation simple. The unit offers DPDT relay output with ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Replacing BinMaster’s SHT-120, the VRX61 vibrating probe level sensor for high temperatures is designed for use in harsh processing environments up to 480°F ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
SHT-140-X - Vibrating rod level sensor, 20 to 250V AC/DC, high temp probe assembly for maximum process temperature 480°F (250°C). Must add rod pipe ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter stainless steel shaft ...