Premus - Model 600 -Joint Pressure Test System
Pressure test system for single joint tests from 200 - 600 mm (Patent No.DE19740276). The tests can be carried out either by air or water; the test sleeves are separately filled. Packer pressure, variable 1,5 - 4,5 bar; test pressure selectable up to 500 mbar. This pressure test system consists of the control unit Premus 600, supplemented by the respective Kampac test packer according to the pipe diameters. A pan and tilt camera is integrated inside the packer. Between the two packer sleeves, is a Plexiglas which allows the camera a 360°view of the pipe for accurate positioning and optical control of the joint during the tests.
The Kampac packer is connected to a crawler and thereby driven to the joint to be tested. The controls, i.e. the pressure transmitter is connected directly at the packer and operated through a magnetic valve. Therefore, the pressure is measured directly at the packer which results in the fact that the volume of air inside the hose doesn`t have any effect on the measurement.
To use this joint test system, a CCTV inspection unit is mandatory.
Details:
Premus 600
- Control unit for pressure tests of reaches and manholes
- Integrated pressure sensor +/- 350 mbar
- an additional pressure sensor up to 750 mbar is available
- Connection for maximum 3 external sensors
- Data acquisition via USB or RS422
- Activation of external pressure source
Kampac hose drum with pneumatic drive
- Hose drum with 150 m camera cable with integrated hose
- Pneumatic drive
- Pressure transmitter for test and packer pressure
- Pneumatic valves
- Height 530x width 460 x depth 530 mm
Control unit
- For testing of joints, laterals and pipe sections
- Test with air and optionally with water
- Operation of Kampac II and Vario Kampac packer
- Integrated valves for faster testing
- Test pressure selectable 0 - 500 mbar
- Separate sleeve inflation with variable pressure values
- Pressure sensor for test area and packer sleeves
- Pressure values and test time configurable
Manual Hose drum for joint tests with water
Test packer
- Packers from 200 up to 600 mm with 360° Plexiglas sleeve for pan and tilt camera
Maxiflex Gel
- For sealing packer and for use in porous pipes
- Gel with memory function
Compressed air and pneumatic unit
- Compressor, intake power 200 l/min
- Compressed air tank, 40 l, 8 bar
- Vacuum pump 220 V, 60 cm³, pressure 600 mbar, toggle switch filling test mode for reaches
- Filling and deflating of larger plugs/stoppers
Water tank
- 150 l, with sensor pump