Schleuniger FiberOptic - Model 7010 -Kevlar Cutting Fiber Stripping Machine
The FiberOptic 7010 cuts and removes the Kevlar material from fiber optic cables up to 4.5 mm (0.18") in diameter, leaving a remaining length between 3 and 60 mm (0.12 and 2.36"). Kevlar, used as a strength member, is very hard to cut with common tools such as scissors. The built-in vacuum system in the FiberOptic 7010 draws the Kevlar strands of the optical fiber wires into the cutting head and removes them precisely. A micro-pore filter disposes of the separated Kevlar, ensuring that no fibers reach the respiratory organs.The number of pneumatically initiated cutting strokes, activated hands-free by a foot pedal, can be adjusted to the thickness of the material. Upon releasing the foot pedal, the vacuum system automatically switches off.
FiberOptic 7010
Metric
- Options: Vacuum cleaner
- Wire outer diameter max.: 4.5 mm
- Strip length min.: 3 mm
- Strip length max.: 30 mm
- Electrical connection: 100/115/230 VAC, 50/60 Hz, 1000 VA (vacuum system)
- Compressed-air connection: 5-7 bar
- Compressed-air quality: Dry, filtered (10 μm), oil-free
- Weight: 3 kg
- Dimensions/length: 600 mm
- Dimensions/width: 75 mm
- Dimensions/height: 130 mm
- Temperature operation: 5 - 40 °C
- Processing outside the specifications: Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
- Cycle time: 3 sec
- Cycle time depending on: depending on cross-section, strip length and pull-off length
- User interface: manual
- Trigger: Foot pedal
- CE conformity: The FiberOptic 7010 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.
Imperial
- Options: Vacuum cleaner
- Wire outer diameter max.: 0.18 in
- Strip length min.: 0.12 in
- Strip length max.: 1.18 in
- Electrical connection: 100/115/230 VAC, 50/60 Hz, 1000 VA (vacuum system)
- Compressed-air connection: 75 - 105 psi
- Compressed-air quality: Dry, filtered (10 μm), oil-free
- Weight: 6.6 lb
- Dimensions/length: 236.22 in
- Dimensions/width: 29.53 in
- Dimensions/height: 51.18 in
- Temperature operation: 41 - 104 °F
- Processing outside the specifications: Processing outside the specifications upon request. In case of doubt, we will be happy to provide processing samples for your wires.
- Cycle time: 3 sec
- Cycle time depending on: depending on cross-section, strip length and pull-off length
- User interface: manual
- Trigger: Foot pedal
- CE conformity: The FiberOptic 7010 fully complies with all CE and EMC equipment guidelines relative to mechanical and electrical safety and electromagnetic compatibility.