- Home
- Companies
- Sense-Tech Weighing Systems ApS
- Products
- Kimax - Model 2 - Sensor Air
Kimax - Model 2 -Sensor Air
Trailer version - direct on your chassis. Kimax 2 sensor is a slave unit without display intended for communication with Kimax 2 radio or Kimax 2 universal through device bus. The Kimax 2 On-Board Load Control is an electronic weighing system which can be used in all vehicles whose axles or axle groups are equipped with air suspension system. Due to the modular construction, the product is very flexible and can be individually adapted to most vehicle conditions. One tractor can easily shift from one trailer to the next trailer without re-calibrations
- Gross weight trailer *
- Current load on all individual axles
- Payload per trailer *
- Alarm for overload on individual axles
- Alarm for Gross weight
On all vehicles you get the best accuracy with two independent air inlets for each axle, one for each pneumatic circuit (right and left) per axle or axle
group, Kimax 2 calculates the current axle load on each axle from two reference values LO and HI pr axle.
A dual or triple axle group can be measured by one measuring channel, a 2-axle trailer needs a Kimax 2 sensor equipped with two measuring channels
Alarm 1 is indicated by a flashing diode for the individual axle on the connected Kimax 2 radio or Kimax 2 universal display unit.
Alarm 2 which switches in an internal "relay" when the selected** weight for this vehicle is exceeded. The relay signal can be used as ON/OFF input for a warning lamp or another device, for example a tracking GPS or an on-board computer.
* Tractor/trailer readings call for a Kimax 2 radio installed in the truck and a Kimax 2 sensor installed on the trailer.
** Alarm 2 can be set for single axle/axle group weight, payload or gross weight by connecting the Kimax Terminal program to your laptop via USB.