Komax - Model CPA Pro -Portable Crimp Force Monitoring Device
With the CPA PRO crimp force monitoring, a quick and accurate check of the performance of fully automatic wire processing machines is carried out– without an additional PC. The CPA PRO is a convenient, portable device that is universally used for testing crimping machines. A real-time graphic display shows the CPK index and standard deviation for shut height and crimp force. This measurement device can be used to perform regular preventive maintenance on crimping presses. Reports are generated directly in production and data analysis can be carried out on site. The shut height and pre-tensioning force are immediately shown on the LCD display. In addition, up to 20 crimp module data can be stored in the device. A timer and cycle counter controls the automatic triggering of the crimp module– ideal for quality control of crimp module manufacturers.
CPA Pro
Metric
- Dimensions/height: 140 mm
- Dimensions/length: 260 mm
- Dimensions/width: 120 mm
- Weight: 6 kg
- Resolution / height sensor: 1 µm
- Resolution / force sensor: 22000 N
- Accuracy / height sensor: Fehlermarge < 5μm
- Accuracy / force sensor: Fehlermarge < 2%
- Measurement range / height sensor: 0.3 mm
- Measurement range / force sensor: 22000 N
- Shut height /calibration information: 135.78 mm
- Pre-tension / calibration information min.: 1000 N
- Pre-tension / calibration information max.: 4000 N
- Electrical connection: 24 V DC, 15 W
Imperial
- Dimensions/height: 5.5 in
- Dimensions/length: 10.2 in
- Dimensions/width: 4.7 in
- Weight: 13.2 lb
- Resolution / height sensor: 1 µm
- Resolution / force sensor: 4945 lbf
- Accuracy / height sensor: Fehlermarge < 5μm
- Accuracy / force sensor: Fehlermarge < 2%
- Measurement range / height sensor: 0.039 in
- Measurement range / force sensor: 4945 lbf
- Shut height /calibration information: 5.35 in
- Pre-tension / calibration information min.: 224 lbf
- Pre-tension / calibration information max.: 899 lbf
- Electrical connection: 24 V DC, 15 W