Komax - Model Q2205 -Wire Processing Machine
As a module in a wire processing machine, the Q2205 measurement device measures with a defined pull-out speed of 25 or 50mm/min the pull-out forces of 20 to 500 N. The precision measuring device generates reproducible measurements and is suitable for very small to medium cross-sections of < 4 mm². It operates at a constant pull-out speed thanks to an embedded control loop. The pull-out forces are collected, transferred and compared with the set point. Seamless integration into the software of the base machine guides you step-by-step through the workflow. A test unit to check the accuracy of the Q2205 is available as an option: A series of measured values are recorded over the entire measurement range and automatically compared with the values of the test unit. A calibration certificate is created at the end of the process. The Q2205’s robust design makes it suitable for harsh conditions in the industrial sector.
Q2205
Metric
- Camera coverage: 24x16 mm
- Air humidity max.: 95 %
- Dimensions/height: 335 mm
- Dimensions/length: 171 mm
- Dimensions/width: 178 mm
- Weight: 7.6 kg
- Temperature operation: 20 (± 10) °C
- Protection class: IP 42
- Measurement range N min.: 20 N
- Measurement range N max.: 500 N
- Pull-out speed min.: 25 mm/min
- Pull-out speed max.: 50 mm/min
- Electrical connection: 110-240VAC to 24VDC
- Installation location: in inside rooms only
Imperial
- Camera coverage: 0.9x0.6 in
- Air humidity max.: 95 %
- Dimensions/height: 13.2 in
- Dimensions/length: 6.7 in
- Dimensions/width: 7 in
- Weight: 16.75 lb
- Temperature operation: 68 (± 50) °F
- Protection class: IP 42
- Measurement range N min.: 20 N
- Measurement range N max.: 500 N
- Pull-out speed min.: 0.98 in/min
- Pull-out speed max.: 1.97 in/min
- Electrical connection: 110-240VAC to 24VDC
- Installation location: in inside rooms only
