LCI - Model Drawworks 250/38-10, 38-8 -Loadcraft Rig

Carrier

• Four axle carrier available with long wheelbase (338") for even weight distribution or with short wheelbase (297") for a shorter turning radius
• Front axles (rated at 22,000 lbs. each) have spring suspension.
• Rear tandem axles (rated at 50,000 lbs. total) have walking beam suspension

Carrier Options

• Two powered front steering axles are optional for use in rough or muddy terrain
• Trailer models are available with either a single drop (gooseneck) or straight (rough terrain) design
• Tool boxes, extra fuel tanks, spare tires, operator platforms can be supplied as needed

Controls and Hydraulic System

• The console panel for all leveling jacks, mast raising and extending cyl., engine, transmission and main drum located at one position for simple, quick rig-up. Operator`s console can be provided movable to 10`-6", 12`, or 14` as required.
• 50 gpm hydraulic pump for all rig hydraulics and tong operation
• Filters provided on pressure and return lines

Options

• Hydraulic oil cooler for continuous use and hot climate applications
• Single or dual 8,000 lbs. hyd. catline winch for safe, efficient lifting around the well site
• Hydraulic catworks for precise control of make-up and break-out torques
• Cold weather packages for -40° operation
• Folding platforms off operator side of rig
• Spare line spool on rig
• Mast lite package
• Install drawworks on conventional truck

Main Drum

• Demountable, forged steel brake rims are 38" diameter x 10" wide (drum shaft diameter is 5 3/4")
• Single line pull is 37,500 lbs.
• 1" wire line size standard

Sandline Drum

• Demountable, forged steel brake rims are 38" diameter x 8" wide
• Wireline capacity per AOSC approved formula:
• 12,760` of 9/16"
• 10,530` of 5/8"

Drawworks Options

• Drawworks Model 250/38-10, 38-8
• Water splash brake cooling
• LEBUS grooving on drum - 1" diameter
• Rotary drive attachment
• Crown block saver
• Disc brake in lieu of Parmac Auxiliary brake

Mast Model 96/180 (Double Tubing, Triple Rods per API 4F)

• Four leg fixed base design allows fast positioning of rig before mast is raised. Clear height is 96` below crown.
• Static hook load capacity:
• on 4 lines 180,000 lbs.
• on 6 lines 225,000 lbs.
• Crossover crown with 24" fast line sheave plus three 24" sheaves
• All sheaves mounted on Timken double row bearings
• Racking platform capacity 18,360` of 2 7/8" EUE tubing
• Hydraulic rams for raising and telescoping

Mast Options

• Speed kit crown, mast lights, rod hangers, work platform, standpipes, 24" sandline sheave
• Optional Mast Model:
• 96/225 twin box mast
• 71/150 twin box mast