Elmac Technologies - Low Pressure Tank Blanketing Valve

The operating principle of the tank blanketing valve is to maintain a positive pressure within an enclosed storage tank by introducing a gas such as nitrogen at a required pressure. This `blanket` also prevents the stored product from vaporising into the atmosphere, prevents contamination to the stored product, and also helps to reduce product combustability by eliminating oxygen-rich air.

The valve also offers primary vacuum relief for the storage tank. It does this by supplying gas to the vapour space when pressure decreases within the tank to the valves set point. Once the gas cushion is re-established, the pressure regulator closes.

• Range of sizes available from 25mm to 50mm
• The valve can be installed with horizontal or vertical diaphragm housing position (horizontal position is recommended)
• All parts that come into contact with the product consist of stainless steel or Hastelloy with smooth surfaces.
• The valve is manufactured in an oil and grease-free environment, is self-actuating, and no control line is needed for operation.
• The inert (oxygen-free) atmosphere reduces the risk of fire which could reduce the cost of your insurance premium.
• Tank corrosion is reduced.
• Reduction from very high primary pressure (up to 16 bar) to very low tank design pressures (down to 5 mbar).
• High accuracy settings achieved, in order to avoid any interaction with relief valves.