- Home
- Companies
- Yangzhou Maoyuan Environmental ...
- Products
- MYEP - Model Heat Pump - Low ...
MYEP - Model Heat Pump -Low Temperature Sludge Dryer Sludge Drying System
This low-temperature drying system uses the principle of heat pump dehumidification to reduce the volume of the wet sludge on the mesh belt by the way of convection hot air drying. The whole system is fully closed design, and the drying hot air has no heat loss.
≤10%Water content, Volume reduction＞80%
Sludge volume further reduction, dry sludge water content ≤10%-50% adjustable, reduction＞80%
1:4.2 Electricity VS Water removal
Innovative 4 effect Condensation dehumidification and drying technology, 1 KWH electricity can remove 4.2KG water
Odor free without deodorization
The whole system adopts closed running design, no odor out, no need to install expensive deodorization system as a secondary investment. It can be directly installed in the plant for centralized disposal, and the condensate can be directly discharged without secondary treatment.
No heat loss, 100% heat use
The system is combined with heat pump heat recovery technology, which has no heat loss and better working efficiency. It is different from the open drying method with continuous moisture removal and continuous high temperature heating.
Safe in low temperature condition, no raising dusts
Fully closed 40-75 ℃ low temperature operation, no need for nitrogen filling operation, oxygen content in drying process is less than 12%, dust concentration is less than 60g / m3, particle temperature is less than 70 ℃, no potential dust and explosion, discharge temperature is less than 50 ℃, no need for secondary cooling, and it can be directly stored.