- Home
- Companies
- Lyndex Recycling Systems Limited
- Products
- Lyndex Meggabite - Multi Purpose Baler
Lyndex Meggabite - Multi Purpose Baler
Lyndex Recycling Systems Limited design and development team looked to develop a multi-purpose baler that could process all types of material without problems. The result was the development of the Meggabite. The Meggabite contains all of the developments from the Bimax shearing press with the addition of two pre-compression flaps.
Pre-Compressions Flaps
The pre-compression flaps are used to increase the infeed density when processing low density materials such as plastics, which result in higher throughputs.
Also when processing bulky high density material the pre-compression flaps are used to push the material below the blade level making processing easier.
With the new improved control system the operator only has to select the type of material grade to be processed. Once selected the system decides if the pre-compression flaps are required resulting in the material being processed in the most efficient and practical way.
- Main cylinder sizes: 125 - 160Tonne
- Power units: 2x37 - 3x55kw
- Hopper size: 2000x1600mm
- Bale size: 1100x1100mm
The all welded construction from thick shot blasted plate guarantees long life, extra vertical ribs in the pressing area to contain all of the pressing forces. The compact design with vertical tying system ensures minimum floor area requirement.
All areas subjected to heavy wear are protected by easily exchangeable bolted wear parts, thus extending the life of the wear parts and reducing operating costs.
Key assemblies are machined where precision is required and the structure is assembled in jigs to ensure tolerances are maintained.
When baling plastic or bulky material, a 2 or 3 wire horizontal tying system can be added to hold the baled material together in uniform bales, reducing expansion.
Dimensions
- Length x Width x Height 12 x 2.5 x 5.1 mtr
- Weight 41 Tonnes
- Hopper Length x Width 2 x 1.6 mtr
- Bale Height x Width 1.1 x 1.1 mtr
- Minimum Hopper Height 2.2 mtr
- Drive 2x37, 2x55, 2x75, 3x55 Kw
- Pressing Force 125, 145 Tonnes
- Specific Pressing Force 10.7, 12.3, 16.74 Kg/cm²
- Pre-Compression Flap Force 45, 60 Tonnes
- Tying Wires Vertical 5
- Tying Wires Horizontal (optional) 3
Capacity
- Infeed Density 10-20 kg/m³ 6 - 17 Tonnes/hour
- Infeed Density 30-40 kg/m³ 20 - 35 Tonnes/hour
- Infeed Density 50-60 kg/m³ 40 - 53 Tonnes/hour
- Infeed Density 80-100 kg/m³ 63 - 70 Tonnes/hour