CDR Pompe S.r.l.
- Home
- Companies
- CDR Pompe S.r.l.
- Products
- CDR - Model UTN-L and UTN-BL - Magnetic ...
CDR - Model UTN-L and UTN-BL -Magnetic Drive Process Pumps
FromCDR Pompe S.r.l.
Single-stage, magnetic drive centrifugal process pumps lined in plastic and fluoroplastic materials. Long-coupled (UTN-L) and close-coupled (UTN-BL) execution. Installed mainly for handling clean toxic, hazardous and aggressive liquids in chemical and pharmaceutical industries where zero-leakage safety is a priority. Thanks to the bearing support it is also recommended for 24/7 applications and temperatures up to +130°.
Most popular related searches
magnetic drive pump
magnetic drive centrifugal pump
process pump
centrifugal process pump
horizontal centrifugal pumping
horizontal centrifugal pump
sealing system
centrifugal pumping
centrifugal pump
split case volute
UTN-L
- Sealing System : Magnetic Drive
- Design : EN 22858; ISO 2858; ISO 15783
- Casing Material : PFA Lined – PVDF Lined – PP Lined
- Bushing/Shaft material : Graphite/SSIC/Ceramic PTFE-Carbon
- Impeller material : Radially split-Volute Casing
- Impeller material : PFA Lined – PVDF Lined – PP Lined
- Impeller type : Closed
- Nozzle Position : End suction
- Execution : Horizontal – Long-Coupled
- Pull-out design : Yes
- Heating Jacket : NA
- Connection Type : Flange
- Flange : UNI 1092-2 (ISO 7005-2) PN16RF
- slotted to ANSI 150
- Self-priming : Non-priming
- Lubrication : Grease
- Maximum Pressure Rating @20°C : PN 16
- Fluid Temperature Range : PP: -10°C / +70°C
- PVDF: -30°C / +100°C
- PFA: -50°C / +160°C
- Maximum Head @ 2900 RPM : 60m
- Maximum Flow Rate @ 2900 RPM : 150 m³/h
- Viscosity Range : 0.5 cSt – 150 cSt
- Maximum Installed Power : 37 kW
UTN-BL
- Sealing System : Magnetic Drive
- Design : EN 22858; ISO 2858; ISO 15783
- Casing Material : PFA Lined – PVDF Lined – PP Lined
- Bushing/Shaft material : Graphite/SSIC/Ceramic PTFE-Carbon
- Impeller material : Radially split-Volute Casing
- Impeller material : PFA Lined – PVDF Lined – PP Lined
- Impeller type : Closed
- Nozzle Position : End suction
- Execution : Horizontal – Close-Coupled
- Pull-out design : Yes
- Heating Jacket : NA
- Connection Type : Flange
- Flange : UNI 1092-2 (ISO 7005-2) PN16RF
- slotted to ANSI 150
- Self-priming : Non-priming
- Lubrication : NA
- Maximum Pressure Rating @20°C : PN 16
- Fluid Temperature Range : PP: -10°C / +70°C
- PVDF: -30°C / +100°C
- PFA: -50°C / +160°C
- Maximum Head @ 2900 RPM : 60m
- Maximum Flow Rate @ 2900 RPM : 150 m³/h
- Viscosity Range : 0.5 cSt – 150 cSt
- Maximum Installed Power : 18,5 kW (37Kw only on bracket II)