- Home
- Companies
- Dekker Vacuum Technologies, Inc.
- Products
- Maxima-K - Model DV2001K-K - Large ...
Maxima-K - Model DV2001K-K -Large Capacity Single Stage Liquid Ring Vacuum Pumps
The Maxima-K design is a robust, single stage design which utilizes flat port plates mounted on each side of the impeller. The variable discharge port allows the pump to operate efficiently throughout the vacuum range. A heavy duty impeller features reinforcing rings to improve strength of the impeller blades and thus the durability of the pump. Packed gland sealing is standard, featuring a split ring gland for ease of maintenance; mechanical seals are optional. Access plates on both sides of the pump allow for quick access to evaluate clearance and perform boroscope inspection. The Maxima-K pumps are available in capacities ranging 1500 ACFM to 39,500 ACFM, are available in various materials/coatings and are manufactured to ISO 9001:2015 quality standards. Bolt in replacements are available for the NASHTM (or Siemens) 2BE series. Selection of Maxima-K versus Maxima-C depends on operating conditions and the most efficient operating point.
- Nominal Capacity (ACFM) 2,050.0
- Motor Size (HP) 100
- Motor Voltage (V) 230/460
- Materials of Construction Casing: CI, Port Plate: CS, Impeller: DI, Shaft: CS
- Inlet Connection Size (Inches) 8
- Inlet Connection Type ANSI 150# RF Flanged
- Cooling Configuration No Recovery
- Discharge Connection Size (Inches) 8
- Discharge Connection Type ANSI 150# RF Flanged
- Materials of Construction Code 8
- Seal Water Flow Rate (GPM) 30
- Max Vacuum Level ("HgV) 24
- Maximum Inlet Temperature (°F) 212
- Phase 3
- Frequency (HZ) 60
- Pump Speed (RPM) 640
- Reliable heavy duty design, built to rigid standards
- Variable discharge port enables pumps to operate at maximum efficiency over the entire vacuum range
- Shaft sleeves are standard, virtually eliminating the possibility of shaft wear
- Available in different materials to suit your application
- Standard sealing is packed gland, mechanical seals available
- Heavy duty bearings mounted external to the pumping chamber eliminating potential bearing failure due to process contamination
- Low operating speeds ensure an extended life cycle
- The pump can handle large amounts of condensable vapors which enhances the performance significantly
- No metal-to-metal contact, only one moving part
- The pumps can handle carry-over of liquids and/or soft solids without causing damage to the internal parts
- The design allows operation with various seal fluids
- Low operating noise levels are in the 75-85 dBA range
- Inlet manifold and discharge separator are optional equipment and must be purchased separately.