Model AC 6000 CIP - Oil and Emulsion Mist Filter
From Oil and Emulsion Mist Filters
The AC 6000 CIP is an automatically cleanable air filter of compact design. Due to its special design, the AC 6000 CIP air filter is perfectly suited for direct machine integration. The aerosol-containing exhaust air flows through a double-step electrostatic air filter. During this process, the particles (aerosols) contained in the air are charged, diverted by an electrical field between the collector plates and precipitated.
-
Most popular related searches
The voltage applied to the collector and ionizer c...
The voltage applied to the collector and ionizer can be changed enabling adaptation to the specific application, e.g. oil or emulsion etc. The AC 6000 CIP is exclusively fitted with regenerative filter elements. Thanks to the use of these elements, in combination with an automatic flushing device, the filters may be cleaned as often as required thus eliminating the high disposal and purchase costs for replacement filters. In addition, a consistently high filtration efficiency of > 99 %, as well as permanent operational safety, is guaranteed.
In regular filter operation, cooling lubricant is delivered from the customer‘s central system into the inter-mediate tank of the filter before being optionally heated. The cleaning of the filter may be scheduled or a machine signal may be output to the filter to start the cleaning process, e.g. during downtimes or when changing the machine setup. In order to reduce oil loss, the stop valve to the fan is closed during the cleaning process. Using a high-pressure pump, the filter elements are cleaned using special flushing nozzles. Contamination is removed due to the optionally heated medium or washed off by the flushing pressure. At the end of the cleaning cycle, the contaminated flushing medium flows back into the central system. In this way, fresh cooling lubricant may be discharged from the central system as flushing medium during the next flushing cycle. The cleaning process is programmed and controlled by a PLC allowing the automatic cleaning procedure to be individually adjusted to the customer‘s requirements.
- ESP
- Effective suction capacity: up to 1,200 m³/h (capable of modular upgrading to 2,400 m³/h)
- Automatic cleaning
- Extended service life
- Only regenerative filter elements
- Constant high separation ratio > 99 %
- Can be mounted directly on the machine
- Minimal energy consumption
Customer reviews
No reviews were found for Model AC 6000 CIP - Oil and Emulsion Mist Filter. Be the first to review!