Model HI 4050 -Weight Controller

Modularity

Configure your HI 4050 weight controller to suit your specific weighing application:

• With or without display
• DeviceNet, EtherNet/IP, ControlNet, Modbus TCP/IP, Profibus, Remote I/O, or Analog interface
• Panel, DIN rail, remote or wall mount
• Either AC or DC power
• Weight by rate

Ease Of Set-Up
Use the embedded web server to set up all parameters from anywhere on the Ethernet network. Front panel keys and LCD display with simple menus provide quick, easy setup with process weight and parameter display. The embedded web server also gives you remote access to control information and instrument parameters, further optimizing production efficiency by sharing real-time data on the plant floor with OEM partners or off-site maintenance personnel

Ease Of Installation
No special tools are required for installation. Just drill or punch standard holes in your panel and attach the front panel keyboard display to the panel front. The weight controller housing can be attached to the rear of the panel or remotely, up to 100 feet away to a DIN rail. It can be mounted vertically, horizontally or offset to make use of available space.

Expandable Secure Memory Module (SMM-SD)
Hardy`s rear panel accessible SMM is more than just a memory card - it now uses a standard Secure Digital (SD) memory card. The card allows easy expansion, the transfer of data from one instrument to another, and is readable on your PC.

C2 Electronic Calibration
C2 enables electronic calibration of the weigh system without test weights. This saves system start-up costs and aggravation. Of course, even if C2 certified load sensors are not used, the system can still be calibrated the slow, traditional way using certified test weights.

Integrated Technician
Integrated Technician, used in conjunction with an IT Junction Box, provides built-in system diagnostics that enable you to troubleshoot and diagnose your weighing system. You can read individual load sensor voltages and weights, make comparisons, and isolate individual system components for quick and easy troubleshooting.

Process Weighing

• Batching/Blending
• Filling/Dispensing
• Level-by-Weight
• Check Weighing
• Rate Monitoring

Display
64x128 LCD display with backlight

Update Rate
110 times per second

Averaging
Sliding up to 250 readings in single unit increments

Resolution
Display: 1:985,000 (3mV/V load cells)
Internal: 1:1,048,000

Standard Interfaces
Ethernet: 10/100base T; embedded web server
Serial RS 232: simplex to printer or to remote scoreboard

Stable Weight Reading
WAVERSAVER 0.25Hz minimum

Calibration Techniques
C2 electronic calibration
Traditional calibration with test weights

Units of Measure
Lb, lb/oz, oz, ton, kg, g, t

Outputs:
Four optional 5 to 24VDC

Mode
Gross, net, available rate-of-change

Load Point Excitation
5VDC power drives up to eight 350-ohm load cells

Digital Inputs
Three mappable, non-isolated
Three optional mappable, isolated

Power Requirement
AC: 110-240VAC, 47-63Hz
DC: 24VDC
10 watts max

Operating Temperature
-10° to +40°C (14° to 104°F)

Storage Temperature
PM: -30° to +70°C (-22° to 158°F)
DR: -40° to +85°C (-40° to 185°F)

Enclosure
Panel/remote mount
DIN mount
Stainless steel wall mount

Dimensions
Front panel: 4”h x 7”w x .725”d
(101.6h x 177.8w x 18.4d mm)
Housing: 2.98”h x 5.65”w x 3”d
(75.7h x 143.5w x 76.2d mm)
Wall mount: 11.50”h x 8.28”w x 5.54”d
(292.1h x 210.3w x 140.6d mm)

Approvals
CE, NTEP, Canada Weights & Measures
UL/CUL, CB Scheme

Class 1, Div2, Groups A-D, Class II, Div2, Groups E-G
Hazardous approvals for PB, CN, DIO & RIO options pending

Warranty
Two-year warranty against defects in workmanship