BAMO Mesures SAS
  1. Companies
  2. BAMO Mesures SAS
  3. Products
  4. Model MUDLine TGS - Portable Sludge ...

Model MUDLine TGS -Portable Sludge Level Measuring Instrument

SHARE

A turbidity sensor (emitter plus receiver) is mounted on an immersion probe with an integrated hydrostatic level sensor. The light beam is in Infra red range at 940 nm.

Most popular related searches
  • Field portable device
  • Sludge level detection, immersion depth up to 10m, in primary and secondary clarifier, thickener, rotten black sludge, sludge level measuring in small sewage plants
  • Adjustable threshold of turbidity detection
  • Accumulator battery operated
  • Range of 100 measurement cycles of 7 minutes each
  • Automatic switched off after 7 minutes
  • Charging time of 2 h 30 min as a maximum

OPERATION
When the immersion probe reaches the sludge surface, the device switches on an audible alarm and a lightning alarm. At the same time the depth of immersion is displayed on the main housing.

TECHNICAL DATA
Accumulator charger supply: 230V AC or 12V CC
Ambient temperature: 0…+50°C
Display: LCD-panel 3-digits, immersion depth [cm]
with measured data storage
with "low battery" signal
1 LED, red: "Sludge level detected"
1 Buzzer: "Sludge level detected"
Measuring accuracy: approximately 1 cm
Immersion probe: PVC / IP68 (10m max.) (EN 60 529)
Cable: special type TPE-cable, 10 m long
Housing and switches: Stand alone with handle
ON-OFF- Lever switch
Sensitivity switch
Sensitivity adjustement potentiometer
IP 44 (EN 60 529)
Dimensions: 300 x 210 x 180 mm
Mass: 3500