Model NA/SF/80 -Solder Fume Extractor
The fume comes from the soldering processing will be sucked into the extractor through the hood by extraction fan. First the fume passes the 1st layer of pre-filter, the coarse particle are remove in this filter. Then the fume enter second layer of HEPA filter, the filtration efficiency is 99.9%. as per the indoor emission standard. The filtered air is directly discharged to the working environment.
· It is suitable for the purification of fume and dust generated in all kinds of Soldering applications.
· The fume comes from the processing will be sucked into the extractor through the hood.
· Suction volume can be adjusted by adjusting volume valve in suction hood.
· Suction arm can be rotated 360° horizontally.
· Filtration efficiency is 99.9%. (above 0.3μm).
· high filtration performance
· 2 and 3 meter flexible suction arm are available.
· Optional for LCD display to show air flow and air pressure.
· Air flow can be adjustable by key switch and remote control.
Soldering fume extractor suitable for fume filtration for
· Soldering PCB Board
· Electronic product soldering
· Reflow soldering
· Wave soldering
· Selective soldering
· Pre Filter.
· HEPA Filter.
· Activated Carbon Filter.
· Articulated flexible Arm.
· Table mount.
· Flexible duct.