Model Odormix SP -Odorous Gas Removal Media for Sewerage Treatment

ODORMIX SP MEDIA demonstrate a higher working capacity for broad-spectrum oxidation of contaminants in actual field conditions, where multiple gas challenges are present. The Purafil SP Series has been specially engineered to contain more permanganate (the active ingredient) for increased removal capacity, allowing the media to remain more available for removal of target gases. Purafil ESD’s Odormix SP (patent-pending) Media offers broad spectrum removal of odorous gases related to sewerage treatment operations.

Most popular related searches

bulk density

Media Specification
Purafil ESD’s Odormix SP Media shall consist of an equal mix (by volume) of Purafil ESD’s Odoroxidant SP Media and Odorkol Media.

Odoroxidant SP Media shall be manufactured of generally spherical, porous pellets formed from a combination of powdered activated alumina and other binders, suitably impregnated with sodium permanganate to provide optimum adsorption, absorption and oxidation of a wide variety of gaseous contaminants. The sodium permanganate shall be applied during pellet formation, such that the impregnant is uniformly distributed throughout the pellet volume and is totally available for reaction. The Odorkol Media shall be a premium grade, activated carbon with a high surface area available for adsorption.

Disposal Requirements
Spent Odormix SP Media should be disposed of according to local, state and federal guidelines.

Advantages

Landfill disposable
UL Classified Class 1
Medias are pre-mixed at Purafil’s factory
Substitutes for a two-pass media factory system
New and spent media is non-toxic

Physical Properties
ODORMIX SP MEDIA BULK DENSITY: 40 lbs/ft3 (0.64 g/cc) + 5%.

Odoroxidant SP Media shall have the following physical properties:

Moisture Content: 35% Maximum
Crush Strength: 35% - 70%
Abrasion: 4.5% Maximum
Bulk Density: 50 lbs/ft3 (0.8 g/cc) + 5%
Nominal Pellet Diameter: 1/16" - 1/8” (1.5 mm - 3.2 mm)
Sodium Permanganate Content: 12% Min.

Odorkol Media shall have the following physical properties:

Moisture Content: 2%
CTC: 60% Minimum
Base Material: Activated Carbon
Bulk Density: 30 lbs/ft3 (0.48 g/cc) + 5%
Pellet Diameter: 4mm

Applications
Purafil ESD`s Odormix SP Media is designed for broad spectrum removal oi odorous gases, including mercaptans, hydrocarbons, hydrogen sulfide and sulfur dioxide. Odormix SP Media is recommended when space within Purafil ESD`s multi-stage scrubber is limited; in this application. Odormix SP substitutes for two media passes. Odormix SP is also recommended as a polishing media.

Application Guidelines
Odormix" SP Media shall perform effectively under the following conditions and guidelines:

Temperature: -4°F to 125°F (-20°Cto5rC)
Humidity: 10 - 95% RH
Airflow: Odormix" SP Media shall be effective in Purafil ESD systems, including the Drum Scrubber with airflows from 100 to 1.000 CFM (170 to 1699 mVhr), Tub Scrubber with airflows from 500 to 6,000 CFM (850 to 10,194 mVhr) and Deep Bed Scrubber with airflows from 600 to 8,000 CFM (1,020 to 13,592 mVhr). Odormix" SP Media shall also be effective in Vessel Scrubbers with airflows from 8,000 to 20,000 cfm (13.592 to 33,980 mVhr).