- Home
- Companies
- Disab Vacuum Technology
- Products
- Model SDC 10 - Vacuum Trucks
Model SDC 10 -Vacuum Trucks
The SDC 100, with its 220 kW suction power meets the industry’s high demands on efficiency, reliability, ease of use and maintenanc. The SDC 100 is an optimum tool to handle both dry and wet material. The round tank design provides ex- cellent performance also for liquid material. Designed to operate as a stand alone vacuum loader for work with 6” hoses but can equally well operate as a central vacuum unit connected to a fixed tube system, facilitat - ing multi-inlet cleaning. Truck engine power supply op - timises load capacity as well as economy of operation.
The unit features
- Sturdy design
- Efficient high vacuum pump (>90% vacuum)
- Filter system for dry & `.vet material with air chock filter cleaning.
- 220 kW, 8100 m3/h suction capacity
- On board storage of hoses, pipes and tools
- Hydraulically operated tailgate, tailgate lock tipping and
- Tool box
The suction unit is powered via a well reputed power transmission. Suction power is regulated on the units controls by adjusting the RPM of the truck. The material is normally sucked through a 6" hose, ac- cessible at the rear of the machine, via an 8" inlet to an inlet box. (Or hose boom, option). Sucked material is separated from the air stream in several steps. First through `fall chamber" principle in the container,
secondly in the filter compartment and finally in the safety filters. The filling of our 9 m3 container can continue until stopped by an automatic level guard. The fine dust, col- lected by the filters, is kept in a separate compartment. Unloading is done by hydraulic tipping, supported by
vibrators (optional). VUiile tipping, the filter chamber can be emptied through pneumatic opening of the filter hatch.
Literally anything, dry or wet, fitting into the 6" hose, can be sucked and transported into the container. Vol- umes sucked vary with material, distance to vacuum unit and operator. As guidance, 10 m3 of cement at a 20 meter distance would be collected within 20-25
minutes. Within reason, the capacity is independent of height differences. Our units are used by manufactur- ers of cement, lime, chemicals, plastics etc. Found- ries, steel mills, quarries, pulp and paper, incineration plants, shipyards and power plants are other examples
of users.