- Home
- Companies
- Iwaki Pumps
- Products
- Model V series - Hi-Cera pumps
Model V series -Hi-Cera pumps
The main components such as the plunger and cylinder are processed with high precision of micron order, so it is possible to obtain high discharge accuracy. (Discharge accuracy : ±0.5%) By changing the angle of the pump head it is possible to freely adjust the discharge amount between 0 and maximum discharge.
Materials such as silicon carbide (SiC), fluorocarbon polymers (PTFE) and stainless casting (SCS14) with excellent resistance to corrosion are used for parts that come in contact with the fluid. This makes it possible to use the pumps for handling a wide range of chemicals.
Since there are no suction and discharge valves, it is possible to directly dispense a constant amount of fluid in a vacuum (negative pressure) without using a solenoid. Constant-volume dispensing is also possible if suction side is pressurized.
The unique valveless construction and the excellent resistance to wear of SiC, it is possible to handle slurries with fast precipitation speed as well as abrasive slurries. Also, the pumps are capable of smoothly pumping highly viscous fluids up to a maximum viscosity of 20,000 mPa･s.
Note: The discharge accuracy drops for viscous fluids with a viscosity of 500 mPa･s or greater. Contact this company for details.
- Max. discharge capacity 1400/1682 mL/min
- Max. discharge pressure 0.7 MPa
- Main materials Alumina ceramic, SiC, SUS316
- Required power range 6 to 40W
- Liquid temp, range Oto 120°C
- Viscous liquid 20000 mPa-s (depending on model)
- Slurry liquid Please contact us for details.
- Seal method Lip seal