Julius Montz GmbH
- Home
- Companies
- Julius Montz GmbH
- Products
- MONTZ-Pak - Model Type B1 - Standard ...
MONTZ-Pak - Model Type B1 -Standard Metal Sheet Packing
The high-performing sheet metal packing; MONTZ-Pak Type B1 is the result of years of experience and development in the field of thermal separation technology with structured packings for mass transfer. MONTZ-Pak Type B1 has proven its performance in many technical applications. The exceptional properties are possible through the regular geometrical arrangement of corrugated sheets and its particular MONTZ surface structure.
Most popular related searches
metal structured packing
air decontamination
process waste
packed column
vacuum distillation
contaminants absorption
oil waste
process water
waste oil processing
manhole
Properties:
- Large throughput capacity
- High flexibility
- High separation performance, close to capacity limits
- Low pressure drop
- Liquid loads from 0.1 to over 250 m³/(m² h)
- Adaptability to every separation problem through variable, specific surfaces
Applications:
- Atmospheric columns and high pressure columns
- Absorption of components and contaminants from gas and air flows
- Natural gas drying with Glycols
- Refinery columns (atmospheric and under vacuum)
- Petrochemical columns
- Exhaust air decontamination in Aluminium rolling mills
- Lubricating oil and rolling oil processing
- Waste water stripper
- Retrofits of existing plate columns or packed columns for performance improvement
Separation steps:
- Depending on the type, >5 theoretical separation steps per meter are achieved.
Materials:
- Stainless steels such as 1.4000, 1.4301, 1.4404, 1.4571 1.4435, 1.4539, and others
- C-steel
- Hastelloy C4, C22, C276, Aluminium, Copper, Titanium, Monel, Tantalum
- Additional materials are available upon request
Retrofits:
- The performance of existing columns such as crude oil columns, natural gas drying, vacuum distillation (for fatty alcohols, fatty acids, Methyl ester etc.) can be improved with upgrades.
Column data:
- Diameters ranging from 40 mm to 11 m and wider
- Liquid load from 40 l/(m² h)
- Operating pressures from vacuum to above 100 bar
- Minimum liquid hold-up
Assembly:
- Packings are manufactured as single pieces or in segments. Packing installation is done through column shell flanges or manholes, as desired.
Inclination angles of wave channels:
- Standard version with 45°
- 60° for larger liquid throughputs and direct heat exchangers in condensation beds
- Additional angles on inclination available upon request