Logo Environmental XPRT
Companies
Products
Services
Software
Training
Applications
Sign in
List your business
Measurements Technology, Inc.
About
  2. Companies
  3. Measurements Technology, Inc.
  4. Products
  5. MTI - Standard Benchtop Universal ...

MTI - Standard Benchtop Universal Testing Systems

SHARE

All MTI Bench-Top Systems are supplied with our powerful Intel Core i5 Pentium based Data Acquisition/Analysis/Control System to provide an integrated automated materials testing system. Force and displacement and strain measurements are automatic. MTI AD-24 automatic 24-bit Force and Strain Signal Processors are supplied with each system. The two AD-24`s provide data accuracy and measurement resolution approaching one part in one hundred thousand in a fully automatic mode of operation. The load frame crosshead displacement measurement is also automatic, with resolution of 0.00005 inches for all tests.

Most popular related searches
load cell
materials testing system
material testing system
load frame
compression testing
signal conditioner
strain monitoring
material testing
compression load cell
data acquisition system
  • Tension and compression testing can be performed in the Test Bay
  • Two precision rolled ball screws with preloaded multiple circuit ball nuts provide smooth, precise crosshead motion under the full operating load range
  • Chrome steel guide rods and linear bearings eliminate lateral surface translation and assure accurate crosshead alignment throughout the full range of travel.
  • Heavy fan-fold bellows protect the lead screws and linear travel bearings from contamination and damage.
  • The loading crosshead surfaces are ground to precise flatness and parallel standards.
  • Each crosshead surface is fabricated with a mounting bolt circle that provides a means of attaching the system load cell or universal joints or any of a large assortment of testing fixtures to any of the four surfaces.
  • A universal joint and linkage for attaching to tensile wedge grips or similar test fixtures is furnished.
  • A universal tension/compression pancake load cell of the frame capacity is provided with system calibration through the MTI AD-24 automatic 24-bit load cell signal conditioner. (A lesser force cell will be substituted upon request.)
  • A high resolution optical encoder coupled to the frame rotating components furnishes crosshead displacement measurements for test programs, and also provides the control system with closed loop feedback to assure constant crosshead travel rate under all load conditions.
  • The MTI-10K is offered in both a floor model or a bench-top configuration
  • A system with extended crosshead travel requirements can be accommodated upon request.
  • The test bay width can be increased as required.
  • Frame Dimensions: 83 inches high, 46 inches wide, 26 inches base depth.
  • Testing Region Size: 28 inches wide, 60 inches vertical, 8 inches crosshead surface depth.
  • Crosshead Travel: 54 inches end-to-end. Actual travel is a function of installed testing fixtures.
  • Frame Dimensions: 68 inches high, 34 inches wide, 16 inches deep.
  • Testing Region Size: 22.5 inches wide, 48 inches vertical, 7 inches crosshead surface depth.
  • Crosshead Travel: 40 inches end-to-end. Actual travel is a function of installed testing fixtures.
  • Testing Region: Below the Moving Crosshead, in Tension or Compression.
  • Testing Speeds: 0.01 to 10 inches per minute standard. Speed range options of 0.02 to 20, or 0.1 to 50 inches per minute are available.
  • Displacement Resolution: 0.00005 inches at standard test speed range.
  • Control: MTI C-DAS Intel Core i5 Pentium for computer control of testing. Manual control for test setup.
  • Weight: Approximately 600 pounds for bench-top systems, 1,000 pounds for 10K floor model.
  • Utility Requirement: 115 volt, single phase 15 amp AC circuit for load frame and control system. A Dedicated surge protected circuit is suggested.