Malatech - Model Bioclean Septic -Natural Biological for Septic Waste Managment

Application of Bioclean Septic boosts anaerobic processes in storage ponds, tanks, and in anaerobic wastewater treatment with continuous wastewater load. The application of the product is very easy and straightforward, but a different approach is needed for applications with extremely high hydraulic residence time for the raw material, where the raw material is usually hardly biodegradable (slurry treatment, and odor removal, organic sludge reduction in sludge storage ponds, and odor control), and for applications with lower HRT, but continuous load, and more easily biodegradable substances in the feed (leachate treatment, anaerobic wastewater treatment).

SLURRY TREATMENT, AND ODOR CONTROL, SLUDGE REDUCTION IN SLUDGE STORAGE PONDS, AND ODOR CONTROL

These high HRT applications may result one of the best return of investment timeframe for our customers. High hydraulic residence time enables a very low specific load for Bioclean Septic compared to the target achieved. Bioclean Septic powder needs to be premixed with water, and the recommended way to execute the treatment is to use a high capacity pump with hoses and sprayer head, and pour the aqueous suspension of the product directly on the surface of the pond or tank filled with the raw material AS EVENLY COVERING THE SURFACE AS POSSIBLE. Please pay attention to the top of the pond or tank: if the raw material floated up on the top because of anaerobic activity and gas formation before the treatment, and forms a thick layer on the top, the access of Bioclean Septic to the raw material may become limited. In this case, after spraying the suspension of Bioclean Septic on the top of the layer covering the surface, you need to keep the surface wet by spraying water on it from time to time to prevent the surface from drying out, which would cause immediate death for bacteria in Bioclean Septic. If the surface is kept wet, Bioclean Septic will start to degrade the thick layer of organics on the top, and once it is done bacteria enter the water column, and start to degrade dissolved organic matter, and particulate organic matter on the top of the sludge layer.

Bioclean Septic treatment is able to deliver 30% more Total Nitrogen removal in an anaerobic way than generic pond bacteria already exist in the system. Fouling odors mainly caused by Hydrogen Sulfide, Mercaptans, and Ammonia are also significantly reduced.