- Model 325 Series - Electric High Pressure Water Jetting System

From

0

The 325 Series water blasting units are quintuplex versions of the 225 Series.  What that means is that opposed to three plungers, these have five, allowing them to run at higher horsepower and product higher flows. Because these units use the exact same fluid end components as the 225 Series, they are a perfect next step when higher horsepower is needed. Models are available ranging in horsepower from 250 to 350 hp (186-260 kW) and with pressure from 8,000 to 40,000 psi (552-2,800 bar).

These units are all built around the 325 convertible pump.  This pump, with its quick-change, in-line fluid end design, has fewer parts for increased operating efficiency and simpler maintenance. And, it requires only a simple conversion kit to operate at pressures between 8,000 and 40,000 psi (552 and 2,800 bar).

The NLB 325 Series units are built to the exacting standards that have made NLB equipment the contractors choice for over 40 years.  All operating controls, including the pressure compensating by-pass valve and pressure gauge with snubber, are mounted on a separate accessory manifold, which provides additional protection for these important components.

NLB’s newest line of waterjetting units are built around the innovative model 325 convertible pump. This pump, with its quick-change, in-line fluid end design, has fewer parts for increased operating efficiency and simpler maintenance. And, it requires only a simple conversion kit to operate at pressures between 8,000 psi (552 bar) and 40,000 psi (2,800 bar).

The NLB 325 Series units are built using the same rugged, reliable designs have been field proven for over 40 years. The units come standard with features like low water pressure shutdown and a high quality electric motorstarter. All operating controls, including thepressure compensating by-pass valve and pressure gauge with snubber, are mounted on a separate accessory manifold, which provides additional protection for these importantcomponents.

  • 3 Slow running plunger pump is built from high-grade stainless steel and provides unprecedented reliability.
  • Pump can be configured for pressures from 8,000 to 40,000 psi in under 30 minutes.
  • NLB pressure conversion kits have fewer components.
  • Accessory manifold with pressure gauge, rupture disc and by-pass valve.
  • Diesel and electric-powered models are available, each mounted on a heavy-duty trailer or steel skid.

Pumping system includes a TEFC electric motor and a combination non-reversing magnetic starter with fuse protection and stop/start push buttons. The system is completely pre-wired for 460 volt service and comes complete with a safety disconnect.

  • Model 355 - 350 hp (260 kw)
  • Model 305 - 300 hp (224 kw)
  • Model 255 - 250 hp (186 kw)

  • Slow running plunger pump built from high-gradestainless steel and provides unprecedented reliability.
  • Pump can be configured for pressures from 8,000 to 40,000 psi in under 30 minutes.

  • Size: 7' wide x 7' 4' high x 9' 4' long Approx.(2.13 m wide x 2.24 m high x 2.84 m long)
  • Weight 13,200 lbs. (5,987kg) Approx.

  • Slow running NLB Model 325 reciprocating pump
  • Five plunger lubrication
  • V-belt drive with guard (optional gear pac)
  • Inlet Water Filtration
  • 30,000 lb. oil-filled pressure gauge with snubber
  • Polypropylene water tank
  • Accessory manifold with by-pass valve
  • All necessary plumbing and operating controls

Customer reviews

No reviews were found for NLB - Model 325 Series - Electric High Pressure Water Jetting System. Be the first to review!