Shanghai Pullner Filtration Technology Co.,Ltd
- Home
- Companies
- Shanghai Pullner Filtration Technology ...
- Products
- Pullner - Model PHFZ Series - Pleated ...
Pullner - Model PHFZ Series -Pleated Filter Cartridge
PHFZ Series washable pleated filter cartridge is currently the most widely used Condensate Polishing pre-filter cartridge in domestic It s made of pleated high-precision polypropylene filter membrane, all welded using hot-melt, without any additives, adhesives and surfactants, which ensure high accuracy, high-throughput high-strength, low extractables and low initial pressure, h can be divided into PHFZ-1 (7 parts), PHFZ-II{2 parts) and PHFZ-IH (4 parts) three types. The PHFZ-II (2 parts) is welded of 40 " and 30 ", is the only one filter with 69mm diameter and integral outer support in domestic.
Most popular related searches
pleated filter cartridge
filter cartridge
pleated filter
condensate polishing
filter element
condensate polishing system
polypropylene filter media
pleated cartridge
cartridge filter
polishing filter
- Integral support, with big filter area, long life, high strength, dimensional stability, low risk of leakage, etc
- Complete polypropylene structure and extensive application of chemical;
- Using the threaded connection, easy installation, high dirt holding capacity;
- Simple system, no acid consumption and pollution of regeneration acid and alkali;
- Different precision can be used as startup and operation filter element of condensate polishing;
- Power plant Condensate Polishing system
- Desalination, iron of petrochemical water treatment
- RO pre-ftitration, desalination pretreatment;
- Filter Media: Polypropylene
- Center Core: Reinforced Polypropylene
- Dimensions) nominal)
- Outside Diameter: 69mm, 65mm(PHFZ-in (4 parts))
- Length: 70"
- Connection Type: Thread
- Connection size: 1 1/2"-12(lnternal thread ), M33"1.5(external thread), {Customized as customers` request)
- Bottom Thread: 3/8. M6, MS, M10
- Micron: 1-10pm
- Filter area: 6.5rH
- Maximum Operating Temperature: 85*C
- Maximum Operating Differential Pressure: 3.0bar, 60`C
- Maximum Operating Differential Pressure{reverse direction): 2.1 bar, 21 `C
- Design Flow Rate: 3.5m3/h`-4.5m3h (Recommended 3.9m3/h)
- Inlet water quality: <2000 ppb
- Backwash water and gas: Under the pressure of 1.36-2.1 bar, each filter backwash water 0.45-0.65 m3 / h. Backwash gas 3.4-5
- m3/ h, can achieve the desired effect.
- 600MW supercritical and ultra-supercritical 1000MW units, respectively recommended use 4pm, 1pm 70 "filter element, when
- debugging startup recommend 10pm filter element.
