Polyeuro - Model 5502 - Two Component Aromatic Polyurea Protective Coating
From Industrial Coatings / Spray Elastomers
Polyeuro 5502 is a fast setting, rapid curing, 100% solids, flexible, aromatic, two component spray polyurea that can be applied to suitably prepared concrete and metal surfaces. Its extremely fast gel time makes it suitable for applications down to -20°F. It may be applied in single or multiple applications without appreciable sagging and is relatively insensitive to moisture and temperature allowing application in most temperatures. Polyeuro 5502 offers a tack free time of less than sixty seconds and exhibits 450% elongation upon curing with 50 Shore D hardness.
Features:
- Zero VOC (100% Solids)
- Seamless
- Excellent Thermal Stability
- Odorless
- Low Temperature Flexibility
- Meets USDA Criteria
- Good Chemical Resistance
- Coats Carbon or Mild Steel Metals without Primer
- Installed With or Without Reinforcement in Transitional Areas
Typical Uses
- Airports
- Power Plants
- Refineries
- Structural Steel
- Fertilizer Plants
- Warehouse Floors
- Mining Operations
- Cold Storage Facilities
- Food Processing Plants
- Landfill Containment
- Marine Environments
- Paper and Pulp Mills
- Secondary Containment
- Parking Garage Decks
- Walkways and Balconies
- Water and Waste Water Treatment
- Industrial and Manufacturing Facilities
Colors
Colors
Clear/Neutral. Custom colors are available upon request. Color Packs, when used, must be added to Part-B. Due to its aromatic composition, Polyeuro 5502 will tend to yellow or darken in color and will become flat after exposure to UV light. Polyeuro 5502 may be topcoated within twelve hours of application with an aliphatic polyurethane/ polyurea coating for a colorfast finish.
Packaging
10 gallon kit: 5 gallons Part-A (Isocyanate side) and 5 gallons Part-B (Resin side).
100 gallon kit: 50 gallons Part-A (Isocyanate side) and 50 gallons Part-B (Resin side).
Coverage
Polyeuro 5502 may be applied at any rate to achieve desired thickness. Theoretical coverage for 1 mil thickness is one gallon per 1600 sq. ft.
Surface Preparation
In general, coating performance and adhesion are directly proportional to surface preparation. Most failures in the performance of surface coatings can be attributed to poor surface preparation. Polyurea coatings rely on the structural strength of the substrate to which they are applied. All surfaces must be free of dust, dirt, oil, grease, rust, corrosion and other contaminants. When coating substrates previously used, it is important to consider the possibility of substrate absorption, which may affect the adhesion of the coating system, regardless of the surface preparation. Polycoat recognizes the potential for unique substrates from one project to another. The following information is for general reference, and for project-specific questions, contact Polycoat.
Customer reviews
No reviews were found for Polyeuro - Model 5502 - Two Component Aromatic Polyurea Protective Coating. Be the first to review!