Color Plot - Portable Imaging Spectrocolorimeter

1. Display. Communicates color information instrument status and option.
2. Measure button. Two stage button; press lightly to start preview and firmly to measure.
   
3. Navigation control.
4. Enter button. Selects menu items and opens tag menu.
5. Power on/off.
6. Speaker and Microphone. For recording and playback of voice tags.
7. USB connection. USB connection for charging the battery and interface to computer or printer.

The Color Plot is lightweight, easy to handle and comes ready to use. In barely more than a second you get a reading on your sample and a report that tells you how close your color is to a measured standard. That’s it. You won’t need to connect to a software program; it’s all right at hand.

• Measuring Geometries: 45/0 Image Capture
• Light Source: Independent tri-directional 25 LED (8* visible wavelengths; 1* UV)
• Illuminant/Observer: D65/10 and A/10
• Standards/Sample Storage: 20/350
• Measurement Time: 1.8 seconds
• Measurement Area: 4 & 8 mm
• Short Term Repeatability: Typical 0.10 DE 94 on white (D65/10)
• Display: 4.5cm Color TFT
• Data Interface: USB (Mass Storage Device)
• Operating Temp.: 0° to 40°C (50° to 104°F)
• Storage Temp.: -20 to 60°C (-4° to 140°F)
• Humidity Range: 20-80% RH (non-condensing)
• Usage: Indoor use only
• Altitude: 2000m
• Pollution Degree: 2
• Transient Overvoltage: Category II

The Color Plot is designed to provide stable color comparisons for materials and products wherever color control is important. Here are just a few of the industries where Color Plot makes a difference:

• Appliances & Housewares
• Building Materials
• Consumer Electronics
• Food and Baked Products
• Apparel/Textiles
• Soft & Hard Home Products
• Toys
• Accessories
• Plastics
• Paints & Coatings