PID Analyzers - Model 114+& IR+ -Portable LEL, CH4, CO, CO2 Analyzer

FromPID Analyzers, LLC

SHARE

The Model 114 is an IR based analyzer that utilizes interchangeable IR sensors (for CO2 and CH4) for low range or high range (0-100% v/v). The Model 114 includes one IR sensor for CH4 or CO2 with up to 3 optional electrochemical sensors, datalogging, Operator`s Manual, and Rechargeable Nickel Metal Hydride Battery. The main application is checking the composition of landfill gases.

Most popular related searches

electrochemical sensor

calibration weight

portable analyzer

mercaptan sensor

Sensors: One IR sensor and three electrochemical sensors.
ADC: Our 16 bit ADC provides a resolution of 1 part in 64,000 and our signal algorithm minimizes noise by signal averaging in the msec range.
Ease of calibration: The two point calibration for each sensor uses a zero gas and a span gas. The time to calibrate is about 30 seconds. The Cal button is located on the main menu for ease of use.
Programmable Voltage output: 0-1VDC.
Datalogging: Manual or automatic datalogging (7,000 points) is available. The 114 has a built in real time clock. Viewer software (Windows 98-XP compatible) comes with the 114.
Display: Our 2 line by 16 character display can be backlit. The upper display provides the concentration and the bottom display provides the sensor, units, alarm and logging mode.
Optional sampling system available: View our PDF for more information.

Species measured: Carbon dioxide or methane/hydrocarbons plus
Sample flow rate: > 0.2 LPM
Power consumption: < 0.75 watt maximum
Performance: CH4,02 or CO2 Referred
Sensor(s): CH4, CO2, optional EC sensors (30+)
Span Drift:
Dimensions: 8"Lx3"Wx2.25"D
Precision: +/- 2-3% of reading
Range: 0-100 % LEL, 0-100% v/v CH4: 0-5,000 ppm CO2,0-100% v/v CO2 note: different IR sensors are used for low level and 100% v/v. these are interchangeable with calibration
Weight: 1.5 pounds
Battery operated: > 10 hours of operation
Response time: Varies from
Linear Range: Varies depending upon the sensor
Instrument operating conditions: 5-40 degrees C, 0-95% RH (non-condensing)