- Home
- Companies
- JAG Jakob Ltd.
- Products
- JAG - Model FLD 32 - Powder Silo ...
JAG - Model FLD 32 -Powder Silo Fluidizing Nozzle
The JAG FLD 32 Fluidising nozzle is an air nozzle which is incorporated into powder silos for powder discharge. Compressed air or nitrogen is injected into the powder medium by pneumatic energy. This improves the flow characteristics of the product and prevents bridge formation.
- Prevention of bridging/core flow
- No projecting nozzle parts on the blow-out side
- Accessible outside the silo, container or funnel
- Nozzle head closes automatically; no fouling can occur
- CIP compatible
- Made entirely of stainless steel
- Good nozzle response even with minimal air injection
- Available as ATEX version
JAG Jakob Ltd Process Technology With its JAG Fluidizing Nozzle, your plant construction & automation partner supplies a simple and effective solution for the problems currently encountered in powder discharge technology
Application areas
Industries such as chemicals, pharmaceuticals, food, cosmetics, paint/lacquers, general powder applications.
Function
The air nozzle is incorporated into powder silos to fluidize and break up product bridges. Pneumatic energy enables a larger volume of air to be injected into the powder medium in a short space of time. The number of air nozzles and the injection intervals must be determined in the light of the flow properties of the powder medium concerned.
The ideal flat shape of the nozzle head eliminates all interfering edges on which dirt may accumulate or flow obstructions occur. This achieves uniform product discharge performance.
System benefits
- Bridge and core flow prevention
- No projecting nozzle parts on the blow-out side
- Stainless steel, no plastic components
- For direct incorporation into silos, containers, funnels, separators etc.
- Can be installed and dismantled from outside the silo
- Suitable for retrofitting on existing process facilities
- Low maintenance
- Automatic pneumatic control
- CIP-compatible design
- Nozzle head closes automatically; this prevents clogging
- Controllable minimum air injection into the product
- Air union internal thread: G1/4“
- Operating pressure: 2,0 – 6,0 bar
- Operating temperature: 4 – 110°C
Materials
- Stainless steel: 1.4435
- Gaskets: EPDM
- Propellants: purified compressed air or nitrogen
- Active diameter (Depending on grain size, density, filling height.): ca. 200-300 mm
Electrical / pneumatic connection
- Example of application